HeungJun, Kim wrote: > > This patch adds Samsung Mobile TRATS board support. > > Signed-off-by: HeungJun, Kim <riverful.kim@xxxxxxxxxxx> > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > --- > arch/arm/mach-exynos/Kconfig | 11 ++ > arch/arm/mach-exynos/Makefile | 1 + > arch/arm/mach-exynos/board-trats.c | 340 > ++++++++++++++++++++++++++++++++++++ > 3 files changed, 352 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/mach-exynos/board-trats.c > If this is for v3.3, unfortunately, it's a little late to add board file and since many things have changed I don't want to cause the conflicts with others now. BTW, why is the name board-xxx not mach-xxx like others? Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. > diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig > index 0afcc3b..3bbbef8 100644 > --- a/arch/arm/mach-exynos/Kconfig > +++ b/arch/arm/mach-exynos/Kconfig > @@ -304,6 +304,17 @@ config MACH_ORIGEN > help > Machine support for ORIGEN based on Samsung EXYNOS4210 > > +config MACH_TRATS > + bool "Mobile TRATS Board" > + select CPU_EXYNOS4210 > + select S3C_DEV_WDT > + select S3C_DEV_HSMMC > + select S3C_DEV_I2C5 > + select EXYNOS4_SETUP_I2C5 > + select EXYNOS4_SETUP_SDHCI > + help > + Machine support for Samsung Mobile TRATS Board. > + > comment "EXYNOS4212 Boards" > > config MACH_SMDK4212 > diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile > index 57e5296..f3bdda9 100644 > --- a/arch/arm/mach-exynos/Makefile > +++ b/arch/arm/mach-exynos/Makefile > @@ -33,6 +33,7 @@ obj-$(CONFIG_MACH_ARMLEX4210) += mach- > armlex4210.o > obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o > obj-$(CONFIG_MACH_NURI) += mach-nuri.o > obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o > +obj-$(CONFIG_MACH_TRATS) += board-trats.o > > obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o > obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o > diff --git a/arch/arm/mach-exynos/board-trats.c b/arch/arm/mach- > exynos/board-trats.c > new file mode 100644 > index 0000000..4c13dfc > --- /dev/null > +++ b/arch/arm/mach-exynos/board-trats.c > @@ -0,0 +1,340 @@ > +/* > + * linux/arch/arm/mach-exynos4/board-trats.c > + * > + * Copyright (c) 2011 Samsung Electronics Co., Ltd. > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/platform_device.h> > +#include <linux/serial_core.h> > +#include <linux/i2c.h> > +#include <linux/gpio.h> > +#include <linux/regulator/machine.h> > +#include <linux/regulator/fixed.h> > +#include <linux/mfd/max8997.h> > +#include <linux/mfd/max8997-private.h> > +#include <linux/mmc/host.h> > + > +#include <asm/mach/arch.h> > +#include <asm/mach-types.h> > + > +#include <plat/regs-serial.h> > +#include <plat/exynos4.h> > +#include <plat/cpu.h> > +#include <plat/devs.h> > +#include <plat/sdhci.h> > +#include <plat/clock.h> > +#include <plat/gpio-cfg.h> > +#include <plat/iic.h> > + > +#include <mach/map.h> > + > +/* Following are default values for UCON, ULCON and UFCON UART registers > */ > +#define TRATS_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ > + S3C2410_UCON_RXILEVEL | \ > + S3C2410_UCON_TXIRQMODE | \ > + S3C2410_UCON_RXIRQMODE | \ > + S3C2410_UCON_RXFIFO_TOI | \ > + S3C2443_UCON_RXERR_IRQEN) > + > +#define TRATS_ULCON_DEFAULT S3C2410_LCON_CS8 > + > +#define TRATS_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ > + S5PV210_UFCON_TXTRIG256 | \ > + S5PV210_UFCON_RXTRIG256) > + > +enum fixed_regulator_id { > + FIXED_REG_ID_MMC = 0, > +}; > + > +static struct s3c2410_uartcfg trats_uartcfgs[] __initdata = { > + { > + .hwport = 0, > + .ucon = TRATS_UCON_DEFAULT, > + .ulcon = TRATS_ULCON_DEFAULT, > + .ufcon = TRATS_UFCON_DEFAULT, > + }, > + { > + .hwport = 1, > + .ucon = TRATS_UCON_DEFAULT, > + .ulcon = TRATS_ULCON_DEFAULT, > + .ufcon = TRATS_UFCON_DEFAULT, > + }, > + { > + .hwport = 2, > + .ucon = TRATS_UCON_DEFAULT, > + .ulcon = TRATS_ULCON_DEFAULT, > + .ufcon = TRATS_UFCON_DEFAULT, > + }, > + { > + .hwport = 3, > + .ucon = TRATS_UCON_DEFAULT, > + .ulcon = TRATS_ULCON_DEFAULT, > + .ufcon = TRATS_UFCON_DEFAULT, > + }, > +}; > + > +/* eMMC */ > +static struct s3c_sdhci_platdata trats_hsmmc0_data __initdata = { > + .max_width = 8, > + .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | > + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | > + MMC_CAP_DISABLE | MMC_CAP_ERASE), > + .cd_type = S3C_SDHCI_CD_PERMANENT, > + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, > +}; > + > +static struct regulator_consumer_supply emmc_supplies[] = { > + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), > +}; > + > +static struct regulator_init_data emmc_fixed_voltage_init_data = { > + .constraints = { > + .name = "VMEM_VDD_2.8V", > + .valid_ops_mask = REGULATOR_CHANGE_STATUS, > + }, > + .num_consumer_supplies = ARRAY_SIZE(emmc_supplies), > + .consumer_supplies = emmc_supplies, > +}; > + > +static struct fixed_voltage_config emmc_fixed_voltage_config = { > + .supply_name = "MASSMEMORY_EN (inverted)", > + .microvolts = 2800000, > + .gpio = EXYNOS4_GPK0(2), > + .enable_high = true, > + .init_data = &emmc_fixed_voltage_init_data, > +}; > + > +static struct platform_device emmc_fixed_voltage = { > + .name = "reg-fixed-voltage", > + .id = FIXED_REG_ID_MMC, > + .dev = { > + .platform_data = &emmc_fixed_voltage_config, > + }, > +}; > + > +static void __init trats_sdhci_init(void) > +{ > + s3c_sdhci0_set_platdata(&trats_hsmmc0_data); > +} > + > +static struct regulator_consumer_supply __initdata max8997_buck1_[] = { > + REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ > +}; > +static struct regulator_consumer_supply __initdata max8997_buck2_[] = { > + REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ > +}; > + > +static struct regulator_init_data __initdata max8997_ldo2_data = { > + .constraints = { > + .name = "VALIVE_1.1V_C210", > + .min_uV = 1100000, > + .max_uV = 1100000, > + .apply_uV = 1, > + .always_on = 1, > + .state_mem = { > + .enabled = 1, > + }, > + }, > +}; > + > +static struct regulator_init_data __initdata max8997_ldo6_data = { > + .constraints = { > + .name = "VCC_1.8V_PDA", > + .min_uV = 1800000, > + .max_uV = 1800000, > + .apply_uV = 1, > + .always_on = 1, > + .state_mem = { > + .enabled = 1, > + }, > + }, > +}; > + > +static struct regulator_init_data __initdata max8997_ldo9_data = { > + .constraints = { > + .name = "VCC_2.8V_PDA", > + .min_uV = 2800000, > + .max_uV = 2800000, > + .apply_uV = 1, > + .always_on = 1, > + .state_mem = { > + .enabled = 1, > + }, > + }, > +}; > + > +static struct regulator_init_data __initdata max8997_ldo10_data = { > + .constraints = { > + .name = "VPLL_1.1V_C210", > + .min_uV = 1100000, > + .max_uV = 1100000, > + .apply_uV = 1, > + .always_on = 1, > + .state_mem = { > + .disabled = 1, > + }, > + }, > +}; > + > +static struct regulator_init_data __initdata max8997_buck1_data = { > + .constraints = { > + .name = "VARM_1.2V_C210", > + .min_uV = 900000, > + .max_uV = 1350000, > + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, > + .always_on = 1, > + .state_mem = { > + .disabled = 1, > + }, > + }, > + .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_), > + .consumer_supplies = max8997_buck1_, > +}; > + > +static struct regulator_init_data __initdata max8997_buck2_data = { > + .constraints = { > + .name = "VINT_1.1V_C210", > + .min_uV = 900000, > + .max_uV = 1100000, > + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, > + .always_on = 1, > + .state_mem = { > + .disabled = 1, > + }, > + }, > + .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_), > + .consumer_supplies = max8997_buck2_, > +}; > + > +static struct regulator_init_data __initdata max8997_buck5_data = { > + .constraints = { > + .name = "VMEM_1.2V_C210", > + .min_uV = 1200000, > + .max_uV = 1200000, > + .apply_uV = 1, > + .always_on = 1, > + .state_mem = { > + .enabled = 1, > + }, > + }, > +}; > + > +static struct regulator_init_data __initdata max8997_buck6_data = { > + .constraints = { > + .name = "V_BAT", > + .min_uV = 2800000, > + .max_uV = 2800000, > + .always_on = 1, > + .state_mem = { > + .enabled = 1, > + }, > + }, > +}; > + > +static struct max8997_regulator_data __initdata trats_max8997_regulators[] > = { > + { MAX8997_LDO2, &max8997_ldo2_data }, > + { MAX8997_LDO6, &max8997_ldo6_data }, > + { MAX8997_LDO9, &max8997_ldo9_data }, > + { MAX8997_LDO10, &max8997_ldo10_data }, > + > + { MAX8997_BUCK1, &max8997_buck1_data }, > + { MAX8997_BUCK2, &max8997_buck2_data }, > + { MAX8997_BUCK5, &max8997_buck5_data }, > + { MAX8997_BUCK6, &max8997_buck6_data }, > +}; > + > +static struct max8997_platform_data __initdata trats_max8997_pdata = { > + .wakeup = 1, > + > + .num_regulators = ARRAY_SIZE(trats_max8997_regulators), > + .regulators = trats_max8997_regulators, > + > + .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), > EXYNOS4_GPL0(0) }, > + > + .buck1_voltage[0] = 1350000, /* 1.35V */ > + .buck1_voltage[1] = 1300000, /* 1.3V */ > + .buck1_voltage[2] = 1250000, /* 1.25V */ > + .buck1_voltage[3] = 1200000, /* 1.2V */ > + .buck1_voltage[4] = 1150000, /* 1.15V */ > + .buck1_voltage[5] = 1100000, /* 1.1V */ > + .buck1_voltage[6] = 1000000, /* 1.0V */ > + .buck1_voltage[7] = 950000, /* 0.95V */ > + > + .buck2_voltage[0] = 1100000, /* 1.1V */ > + .buck2_voltage[1] = 1000000, /* 1.0V */ > + .buck2_voltage[2] = 950000, /* 0.95V */ > + .buck2_voltage[3] = 900000, /* 0.9V */ > + .buck2_voltage[4] = 1100000, /* 1.1V */ > + .buck2_voltage[5] = 1000000, /* 1.0V */ > + .buck2_voltage[6] = 950000, /* 0.95V */ > + .buck2_voltage[7] = 900000, /* 0.9V */ > + > + .buck5_voltage[0] = 1200000, /* 1.2V */ > + .buck5_voltage[1] = 1200000, /* 1.2V */ > + .buck5_voltage[2] = 1200000, /* 1.2V */ > + .buck5_voltage[3] = 1200000, /* 1.2V */ > + .buck5_voltage[4] = 1200000, /* 1.2V */ > + .buck5_voltage[5] = 1200000, /* 1.2V */ > + .buck5_voltage[6] = 1200000, /* 1.2V */ > + .buck5_voltage[7] = 1200000, /* 1.2V */ > +}; > + > +/* I2C 5 (PMIC) */ > +enum { I2C5_MAX8997 }; > +static struct i2c_board_info i2c5_devs[] __initdata = { > + [I2C5_MAX8997] = { > + I2C_BOARD_INFO("max8997", 0xCC >> 1), > + .platform_data = &trats_max8997_pdata, > + }, > +}; > + > +static void __init trats_power_init(void) > +{ > + int gpio; > + > + gpio = EXYNOS4_GPX0(7); > + gpio_request(gpio, "AP_PMIC_IRQ"); > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); > + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); > +} > + > +static struct platform_device *trats_devices[] __initdata = { > + /* Samsung Platform Devices */ > + &s3c_device_i2c5, /* PMIC should initialize first */ > + &emmc_fixed_voltage, > + &s3c_device_hsmmc0, > + &s3c_device_wdt, > +}; > + > +static void __init trats_map_io(void) > +{ > + s5p_init_io(NULL, 0, S5P_VA_CHIPID); > + s3c24xx_init_clocks(24000000); > + s3c24xx_init_uarts(trats_uartcfgs, ARRAY_SIZE(trats_uartcfgs)); > +} > + > +static void __init trats_machine_init(void) > +{ > + trats_sdhci_init(); > + trats_power_init(); > + > + s3c_i2c5_set_platdata(NULL); > + i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7)); > + i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); > + > + /* Last */ > + platform_add_devices(trats_devices, ARRAY_SIZE(trats_devices)); > +} > + > +MACHINE_START(TRATS, "TRATS") > + /* Maintainer: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> */ > + .atag_offset = 0x100, > + .init_irq = exynos4_init_irq, > + .map_io = trats_map_io, > + .init_machine = trats_machine_init, > + .timer = &exynos4_timer, > +MACHINE_END > -- > 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html