Sachin Kamat wrote:
>
> This patch enables the regulators for HDMI on Origen board.
>
> Since the DC5V line is connected directly to the HDMI connector,
> "hdmi-en" regulator would become a dummy regulator on origen board
> (by defining REGULATOR_DUMMY in the kernel config file).
>
> Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
> ---
> arch/arm/mach-exynos4/mach-origen.c | 3 +++
> 1 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-exynos4/mach-origen.c
b/arch/arm/mach-exynos4/mach-
> origen.c
> index 18909cf..39d8d4e 100644
> --- a/arch/arm/mach-exynos4/mach-origen.c
> +++ b/arch/arm/mach-exynos4/mach-origen.c
> @@ -89,6 +89,8 @@ static struct s3c2410_uartcfg origen_uartcfgs[]
__initdata = {
>
> static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
> REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */
> + REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
> + REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
> };
> static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
> REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */
> @@ -98,6 +100,7 @@ static struct regulator_consumer_supply __initdata
> ldo7_consumer[] = {
> };
> static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
> REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
> + REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
> };
> static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
> REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810
> BT */
> --
> 1.7.4.1
Looks ok to me, will apply.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
