On 05/25/11 11:04, Marc Zyngier wrote:
On Wed, 2011-05-25 at 10:28 -0700, Kukjin Kim wrote:
On 05/20/11 06:46, Marc Zyngier wrote:
(snip)
So that address has changed between two SoC revisions? That's
unfortunate, to say the least. I'm most probably using an early revision
of the hardware (EVT0?), as it doesn't even support MCT.
I'm afraid :( and I agree secondary CPU should work on all of
Exynos4210. But I'm still think about the method...
What about the following patch?
Uhm...this is really hack but I'd like to use another normal way...?
M.
From c27e75b86e1ee181987a9364286a888421e76205 Mon Sep 17 00:00:00 2001
From: Marc Zyngier<marc.zyngier@xxxxxxx>
Date: Fri, 20 May 2011 14:38:25 +0100
Subject: [PATCH] ARM: exynos4: fix secondary CPU boot on early SoC revisions
It appears that the system-wide flags register that used to be at
0x02025000 on the first revision of Exynos4 has moved to 0x02020000.
The kernel has been updated accordingly, but this unfortunately leaves
early boards without SMP support (the secondary CPU spins endlessly
in BL0 waiting for an address to be written at that memory location).
Try to solve the problem by poking both locations. This should be
safe as this is done early enough in the kernel boot process, and nobody
should be using the SRAM yet.
Tested on a vintage SMDK-v310.
vintage ;)
Cc: Kukjin Kim<kgene.kim@xxxxxxxxxxx>
Signed-off-by: Marc Zyngier<marc.zyngier@xxxxxxx>
---
arch/arm/mach-exynos4/include/mach/map.h | 1 +
arch/arm/mach-exynos4/platsmp.c | 14 ++++++++++++++
2 files changed, 15 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index 0009e77..781e149 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -24,6 +24,7 @@
#include<plat/map-s5p.h>
#define EXYNOS4_PA_SYSRAM 0x02020000
+#define EXYNOS4_PA_SYSRAM_EVT0 0x02025000
#define EXYNOS4_PA_FIMC0 0x11800000
#define EXYNOS4_PA_FIMC1 0x11810000
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index c5e65a0..f261c34 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -155,6 +155,7 @@ void __init smp_init_cpus(void)
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
+ void __iomem *sysram_evt0;
/*
* Initialise the present map, which describes the set of CPUs
@@ -172,4 +173,17 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
* secondary CPU branches to this address.
*/
__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM);
+
+ /*
+ * EVT0 has the system-wide flags register at a different address.
+ * Poke it as well, in case we're running on an old SoC revision.
+ */
+ sysram_evt0 = ioremap(EXYNOS4_PA_SYSRAM_EVT0, SZ_4K);
Hmm...first of all, need to check whether can ioremap the area on newer
one but I'm out off office now so will check it after backing.
+ if (!sysram_evt0) {
+ pr_err("Unable to remap EXYNOS4_PA_SYSRAM_EVT0\n");
Do we really need 'pr_err' here?...
+ return;
+ }
+
+ __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), sysram_evt0);
+ iounmap(sysram_evt0);
}
--
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
