Kukjin Kim wrote:
>
> Minkyu Kang wrote:
> >
> > Dear Kukjin Kim,
> >
> > 2011-02-28 ìí 4:42, Kukjin Kim ì ê:
> > > Minkyu Kang wrote:
> > >>
> > >> This patch adds Samsung NURI board support.
> > >>
> > >> Signed-off-by: Minkyu Kang <mk7.kang@xxxxxxxxxxx>
> > >> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> > >> ---
> > >> This patch is base on next-exynos4 branch at kgene tree.
> > >>
> > >> arch/arm/configs/exynos4_defconfig | 1 +
> > >> arch/arm/mach-exynos4/Kconfig | 15 +++
> > >> arch/arm/mach-exynos4/Makefile | 1 +
> > >> arch/arm/mach-exynos4/mach-nuri.c | 233
> > >> ++++++++++++++++++++++++++++++++++++
> > >> 4 files changed, 250 insertions(+), 0 deletions(-)
> > >> create mode 100644 arch/arm/mach-exynos4/mach-nuri.c
> > >>
> > >
> > >> +enum fixed_regulator_id {
> > >> + FIXED_REG_ID_MMC = 0,
> > >
> > > FIXED_REG_ID_MMC,
> > >
> > > (snip)
> > >
> > >> +static struct platform_device emmc_fixed_voltage = {
> > >> + .name = "reg-fixed-voltage",
> > >> + .id = FIXED_REG_ID_MMC,
> > >
> > > Is there any reason to use FIXED_REG_ID_MMC instead directly id 0?
> > >
> >
> > I'm going to add more IDs of fixed regulator that are LCD and Backlight,
> and
> > so on.
> > So use enum values for avoid the hard coding.
> >
>
> Ok, applied this after removing "ifdef WATCHDOG".
Oops, NURI board is not registered yet :(
So can't merge this before updating it now.
Or should drop update defconfig from this...
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
