On Thu, Oct 21, 2010 at 11:36 AM, Kukjin Kim <kgene.kim@xxxxxxxxxxx> wrote: > Kyungmin Park wrote: >> >> On Thu, Oct 21, 2010 at 9:58 AM, Kukjin Kim <kgene.kim@xxxxxxxxxxx> wrote: >> > From: Seungwhan Youn <sw.youn@xxxxxxxxxxx> >> > >> > This patch adds to enable/disable DMA operation clock on S3C-PL330 >> > DMA controller driver. >> >> The title and description seems to clock gating but actual code is >> just enable at probe and disable at remove. >> >> Can you make it REAL clock gating, enable clock only when using? >> > > This is just to move DMA enable/disable clock into DMA driver(S3C PL330). > So it would be better if we could discuss about what you said next time. > > Basically, I prefer most clocks should be registered as disabled, then if > required enable, just should be controlled in each driver. And support clock & block gating basically at drivers. > > Thanks. > > Best regards, > Kgene. > -- > Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, > SW Solution Development Team, Samsung Electronics Co., Ltd. > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |