Marek Szyprowski wrote:
>
> Add required platform definitions for S6E63M0 LCD controller on Samsung
> Goni board.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
>
> Changes since v2:
> - removed defines for lcd pin names
>
> arch/arm/mach-s5pv210/mach-goni.c | 66
> +++++++++++++++++++++++++++++++++++++
> 1 files changed, 66 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/mach-goni.c
b/arch/arm/mach-s5pv210/mach-
> goni.c
> index b0ae208..ac6ebab 100644
> --- a/arch/arm/mach-s5pv210/mach-goni.c
> +++ b/arch/arm/mach-s5pv210/mach-goni.c
(snip)
> +static struct lcd_platform_data s6e63m0_platform_data = {
> + .reset = reset_lcd,
> + .power_on = lcd_power_on,
> + .lcd_enabled = 0,
> + .reset_delay = 120, /* 120ms */
> + .power_on_delay = 25, /* 25ms */
> + .power_off_delay = 200, /* 200ms */
> +};
> +
> +#define LCD_BUS_NUM 3
> +static struct spi_board_info spi_board_info[] __initdata = {
> + {
> + .modalias = "s6e63m0",
> + .platform_data = &goni_lcd_platform_data,
Happened following build error.
arch/arm/mach-s5pv210/mach-goni.c:153: error: 'goni_lcd_platform_data'
undeclared here (not in a function)
should be 's6e63m0_platform_data'?..let me know your preferred name.
Will apply with changing it.
> + .max_speed_hz = 1200000,
> + .bus_num = LCD_BUS_NUM,
> + .chip_select = 0,
> + .mode = SPI_MODE_3,
> + .controller_data = (void *)S5PV210_MP01(1), /* DISPLAY_CS */
> + },
> +};
(snip)
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
