Hello,
On Friday, September 10, 2010 12:45 PM Kukjin Kim wrote:
> Marek Szyprowski wrote:
> >
> > Add required platform definitions for s3c-hsotg driver to enable usb
> > gadget support on Samsung Goni board.
> >
> > Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> > ---
> > arch/arm/mach-s5pv210/Kconfig | 1 +
> > arch/arm/mach-s5pv210/mach-goni.c | 5 +++++
> > 2 files changed, 6 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-
> s5pv210/Kconfig
> > index b1f671d..f8bac5a 100644
> > --- a/arch/arm/mach-s5pv210/Kconfig
> > +++ b/arch/arm/mach-s5pv210/Kconfig
> > @@ -85,6 +85,7 @@ config MACH_GONI
> > select S3C_DEV_HSMMC2
> > select S3C_DEV_I2C1
> > select S5P_DEV_ONENAND
> > + select S3C_DEV_USB_HSOTG
> > select SAMSUNG_DEV_KEYPAD
> > select S5PV210_SETUP_FB_24BPP
> > select S5PV210_SETUP_I2C1
> > diff --git a/arch/arm/mach-s5pv210/mach-goni.c
> b/arch/arm/mach-s5pv210/mach-
> > goni.c
> > index 30da422..b28a42b 100644
> > --- a/arch/arm/mach-s5pv210/mach-goni.c
> > +++ b/arch/arm/mach-s5pv210/mach-goni.c
> > @@ -41,6 +41,8 @@
> > #include <plat/iic.h>
> > #include <plat/keypad.h>
> > #include <plat/sdhci.h>
> > +#include <plat/clock.h>
> > +#include <plat/s5p-clock.h>
>
> Hmm...same 'extern struct clk_xusbxti' defined both.
> I will sort out :-)
>
> I think, just one inclusion is enough now.
Ok. I will fix this. This patch is quite old and I remember that
some time ago both includes were required.
> If any problems, please let me know.
>
> >
> > /* Following are default values for UCON, ULCON and UFCON UART registers
> */
> > #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
> > @@ -569,6 +571,7 @@ static struct platform_device *goni_devices[]
> __initdata = {
> > &s3c_device_fb,
> > &s5p_device_onenand,
> > &goni_spi_gpio,
> > + &s3c_device_usb_hsotg,
> > &goni_i2c_gpio_pmic,
> > &goni_device_gpiokeys,
> > &s5p_device_fimc0,
> > @@ -613,6 +616,8 @@ static void __init goni_machine_init(void)
> > samsung_keypad_set_platdata(&keypad_data);
> >
> > platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
> > +
> > + clk_xusbxti.rate = 24000000;
> > }
> >
> > MACHINE_START(GONI, "GONI")
> > --
>
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
