Add required platform definitions for s3c-hsotg driver to enable usb
gadget support on Samsung Goni board.
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/mach-s5pv210/Kconfig | 1 +
arch/arm/mach-s5pv210/mach-goni.c | 5 +++++
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index b1f671d..f8bac5a 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -85,6 +85,7 @@ config MACH_GONI
select S3C_DEV_HSMMC2
select S3C_DEV_I2C1
select S5P_DEV_ONENAND
+ select S3C_DEV_USB_HSOTG
select SAMSUNG_DEV_KEYPAD
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_I2C1
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 30da422..b28a42b 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -41,6 +41,8 @@
#include <plat/iic.h>
#include <plat/keypad.h>
#include <plat/sdhci.h>
+#include <plat/clock.h>
+#include <plat/s5p-clock.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -569,6 +571,7 @@ static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
&goni_spi_gpio,
+ &s3c_device_usb_hsotg,
&goni_i2c_gpio_pmic,
&goni_device_gpiokeys,
&s5p_device_fimc0,
@@ -613,6 +616,8 @@ static void __init goni_machine_init(void)
samsung_keypad_set_platdata(&keypad_data);
platform_add_devices(goni_devices, ARRAY_SIZE(goni_devices));
+
+ clk_xusbxti.rate = 24000000;
}
MACHINE_START(GONI, "GONI")
--
1.7.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
