Re: [PATCH v5 1/7] s390: ap: kvm: add PQAP interception for AQIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 19/03/2019 15:54, Halil Pasic wrote:
On Tue, 19 Mar 2019 11:01:44 +0100
Pierre Morel <pmorel@xxxxxxxxxxxxx> wrote:

On 15/03/2019 18:28, Halil Pasic wrote:

[..]


Things get complicated when one considers that ECA.28 is an effective
control.

I don't think so, ECA_28 is not really a problem.
We do not propagate ECA_AIV in VSIE and ECA_AIV is tested in the vfio
driver to support GISA.
So that the guest 3 will not support interrupt.


That was not my concern, but while we are at it... I guess you refer to
the check in handle_pqap(). That seems to do -EOPNOTSUPP, i.e. got to
userspace, i.e. with today's QEMU operation exception. Which does not
seem right.

We already discussed this. no?


My concern was the following. Let assume
ECA.28 == 1 and EECA.28 == 0 != 1
and guest issues a PQAP (for simplicity AQIC).

Currently I guess we take a 0x04 interception and go to userspace, which
may or may not be the best thing to do.

With this patch we would take a 0x04, but (opposed to before) if guest
does not have facility 65 we go with a specification exception.

This is not right.
We return -EOPNOTSUPP which will be intercepted by QEMU which will report an OPERATION exception as before.

Operation exception should however take priority over this kind of
specification exception. So basically everything except PQAP/AQIC would
give you and operation exception (with current QEMU), but PQAP/AQIC would
give you a specification exception. Which is wrong!

AFAICT there is no way to tell if we got a 04 interception because
EECA.28 != 1 (and ECA.28 == 1) and FW won't interpret the AP
instructions for us, or because it PQAP/AQIC is a mandatory intercept.
In other words I don't see a way to tell if EECA.28 is 1 when
interpreting PQAP/AQIC.

Do you agree?


No.
EECA = HOST_ECA & GUEST_ECA
after we made sure that AP instructions are available, HOST_ECA=1

(vcpu->arch.sie_block->eca & ECA_APIE) gives us the answer.

In the case HOST_ECA=0 we always go to userland as before.


[..]


Yes, the alternative is:

1) We do things right but this mean we change the ABI (SPECIFICATION
instead of OPERATION)

I thing this is the best thing to do, it is the implementation
proposed by this patch where all is done in Kernel, so that we are
right what ever the userland user is (QEMU or other).

2) We want to preserve the old ABI for old QEMU
Then I proposed the implementation here under.


My personal opinion, is that we should change the ABI and do things
right now.

I tend to agree. Giving an operation exception instead of a specification
exception is a bug. If it is a kernel or qemu bug it ain't clear to me
at the moment.

We should also do it right for TAPQ with t bit set. I remember
Christian already warned about this but we did not implement it.


Yes, I have some blurry memories of something similar myself. I wonder
if there was a reason, or did we just forget to address this issue.


I will integrate it in the next iteration too, even it is not IRQ, the PQAP hook patch can be more general.

Regards,
Pierre


Regards,
Halil



--
Pierre Morel
Linux/KVM/QEMU in Böblingen - Germany




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux