Re: [PATCH v3 1/9] s390: vfio_ap: link the vfio_ap devices to the vfio_ap bus subsystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/15/19 4:11 AM, Cornelia Huck wrote:
On Thu, 14 Feb 2019 13:30:59 -0500
Tony Krowiak <akrowiak@xxxxxxxxxxxxx> wrote:

On 2/14/19 12:36 PM, Pierre Morel wrote:
On 14/02/2019 17:57, Cornelia Huck wrote:
On Thu, 14 Feb 2019 16:47:30 +0100 Pierre Morel
<pmorel@xxxxxxxxxxxxx> wrote:
On 14/02/2019 15:54, Cornelia Huck wrote:
On Thu, 14 Feb 2019 14:51:01 +0100 Pierre Morel
<pmorel@xxxxxxxxxxxxx> wrote:

-    matrix_dev->device.type = &vfio_ap_dev_type;
dev_set_name(&matrix_dev->device, "%s", VFIO_AP_DEV_NAME);
matrix_dev->device.parent = root_device; +
matrix_dev->device.bus = &matrix_bus; matrix_dev->device.release =
vfio_ap_matrix_dev_release; -
matrix_dev->device.driver = &vfio_ap_drv.driver; +
matrix_dev->vfio_ap_drv = &vfio_ap_drv;

Can't you get that structure through matrix_dev->device.driver
instead when you need it in the function below?

Not anymore. We have two different drivers and devices matrix_drv
<-> matrix_dev and vfio_ap_drv <-> ap_devices

The driver behind the matrix_dev->dev->driver is matrix_drv what is
needed here is vfio_ap_drv.

Wait, we had tacked a driver for ap devices unto a matrix device,
which is not on the ap bus?

It's really a bit more complicated than that. Without going into a
lengthy description of the history of AP passthrough support, suffice it
to say that we needed a device to serve as the parent of each mediated
device used to configure a matrix of AP adapter IDs and domain indexes
identifying the devices to which a guest would be granted access. The
AP devices themselves are attached to the AP bus, but the matrix device
is an artificial (virtual?) device whose sole purpose in life is to
serve as an anchor for the mediated devices whose sysfs interfaces are
created and managed by the vfio_ap device driver. The matrix device
itself is created by the vfio_ap device driver - when it is initialized
- for that purpose. In hindsight, maybe there was a better way to
implement this, but neither this patch nor this discussion belongs in
this series. It distracts from discussion of interrupt support which is
the sole purpose of the patch series.

The we-need-a-parent part is fine; but whatever we're doing with that
driver just looks wrong, so that even the new bus that basically does
nothing looks better...

I believe there might be a much better way to handle this which is why
I objected to this patch being delivered with this series, which
provides AP interrupt support. Quite simply, this patch has no
relationship to interrupt support and should be considered as an item
unto itself. To conduct a review within the context of interrupt
support distracts focus from the pertinent subject matter.




...yes -(
Maybe that's what trips libudev? >
(And reading further in the current code, it seems we clear that
structure _after_ the matrix device had been setup, so how can that
even work? Where am I confused?)

On device_register there were no bus, so the core just do not look for a
driver and this field was nor tested nor overwritten.

Hm... so has the callback in driver_for_each_device() in
vfio_ap_verify_queue_reserved() ever been invoked at all? It seems this
patch fixes more than just libudev issues...

It is this patch that rendered the driver_for_each_device() in
vfio_ap_verify_queue_reserved() erroneous. That function gets called
every time an adapter or domain is assigned to the mdev. This patch
introduced the problem with driver_for_each_device().



ret = device_register(&matrix_dev->device); if (ret) goto
matrix_reg_err;

+    ret = driver_register(&matrix_driver.drv); +    if (ret)
+        goto
matrix_drv_err; +

As you already have several structures that can be registered
exactly once (the root device, the bus, the driver, ...), you can
already be sure that there's only one device on the bus, can't
you?

hum, no I don't think so, no device can register before this module
is loaded, but what does prevent a device to register later from
another module?

Not unless you export the interface, I guess.

:) definitively right
thanks, this will simplify the code in the next version.
I will take the patch away from this series to get the way to stable as
Christian requested.

Yeah, makes sense.





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux