[PATCH 1/2] zfcp: fix posting too many status read buffers leading to adapter shutdown

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Suppose adapter (open) recovery is between opened QDIO queues and before
(the end of) initial posting of status read buffers (SRBs). This time
window can be seconds long due to FSF_PROT_HOST_CONNECTION_INITIALIZING
causing by design looping with exponential increase sleeps in the function
performing exchange config data during recovery
[zfcp_erp_adapter_strat_fsf_xconf()]. Recovery triggered by local link up.

Suppose an event occurs for which the FCP channel would send an
unsolicited notification to zfcp by means of a previously posted SRB.
We saw it with local cable pull (link down) in multi-initiator zoning
with multiple NPIV-enabled subchannels of the same shared FCP channel.

As soon as zfcp_erp_adapter_strategy_open_fsf() starts posting the
initial status read buffers from within the adapter's ERP thread,
the channel does send an unsolicited notification.

Since v2.6.27 commit d26ab06ede83 ("[SCSI] zfcp: receiving an unsolicted
status can lead to I/O stall"), zfcp_fsf_status_read_handler() schedules
adapter->stat_work to re-fill the just consumed SRB from a work item.

Now the ERP thread and the work item post SRBs in parallel.
Both contexts call the helper function zfcp_status_read_refill().
The tracking of missing (to be posted / re-filled) SRBs is not thread-safe
due to separate atomic_read() and atomic_dec(), in order to depend on
posting success. Hence, both contexts can see
atomic_read(&adapter->stat_miss) == 1. One of the two contexts posts
one too many SRB. Zfcp gets QDIO_ERROR_SLSB_STATE on the output queue
(trace tag "qdireq1") leading to zfcp_erp_adapter_shutdown() in
zfcp_qdio_handler_error().

An obvious and seemingly clean fix would be to schedule stat_work
from the ERP thread and wait for it to finish. This would serialize
all SRB re-fills. However, we already have another work item wait on the
ERP thread: adapter->scan_work runs zfcp_fc_scan_ports() which calls
zfcp_fc_eval_gpn_ft(). The latter calls zfcp_erp_wait() to wait for all
the open port recoveries during zfcp auto port scan, but in fact it waits
for any pending recovery including an adapter recovery. This approach
leads to a deadlock.
[see also v3.19 commit 18f87a67e6d6 ("zfcp: auto port scan resiliency");
v2.6.37 commit d3e1088d6873
("[SCSI] zfcp: No ERP escalation on gpn_ft eval");
v2.6.28 commit fca55b6fb587
("[SCSI] zfcp: fix deadlock between wq triggered port scan and ERP")
fixing v2.6.27 commit c57a39a45a76
("[SCSI] zfcp: wait until adapter is finished with ERP during auto-port");
v2.6.27 commit cc8c282963bd
("[SCSI] zfcp: Automatically attach remote ports")]

Instead make the accounting of missing SRBs atomic for parallel
execution in both the ERP thread and adapter->stat_work.

Signed-off-by: Steffen Maier <maier@xxxxxxxxxxxxx>
Fixes: d26ab06ede83 ("[SCSI] zfcp: receiving an unsolicted status can lead to I/O stall")
Cc: <stable@xxxxxxxxxxxxxxx> #2.6.27+
Reviewed-by: Jens Remus <jremus@xxxxxxxxxxxxx>
---
 drivers/s390/scsi/zfcp_aux.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index df10f4e07a4a..882789fff574 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -271,16 +271,16 @@ static void zfcp_free_low_mem_buffers(struct zfcp_adapter *adapter)
  */
 int zfcp_status_read_refill(struct zfcp_adapter *adapter)
 {
-	while (atomic_read(&adapter->stat_miss) > 0)
+	while (atomic_add_unless(&adapter->stat_miss, -1, 0))
 		if (zfcp_fsf_status_read(adapter->qdio)) {
+			atomic_inc(&adapter->stat_miss); /* undo add -1 */
 			if (atomic_read(&adapter->stat_miss) >=
 			    adapter->stat_read_buf_num) {
 				zfcp_erp_adapter_reopen(adapter, 0, "axsref1");
 				return 1;
 			}
 			break;
-		} else
-			atomic_dec(&adapter->stat_miss);
+		}
 	return 0;
 }
 
-- 
2.16.4




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux