On Sunday 08 March 2009, Frans Pop wrote: > On Sunday 08 March 2009, Frans Pop wrote: > > In my previous mail I reported that 2.6.29-rc7 booted OK too after > > applying the same reverts as needed for .27 and .28 for Hercules, but > > I did run into a new issue. > > > > Initially I had CONFIG_HVC_IUCV set to y, and with that the boot > > stopped after: > > hvc_iucv: The z/VM IUCV HVC device driver cannot be used without z/VM > > > > Looks like the system got into a loop with one processor at 100%. > > > > After disabling the option the boot was successful. > > Well, not quite. It does boot successfully and I do get a login prompt. > I can also login on the console or connect with SSH, but in both cases > the system again gets into some loop before I actually get a shell > prompt. Looks like it may be related? I'll bisect this. As I can't be sure whether the boot failure with HVC_IUCV is or isn't a side effect of the hrtimer issue mentioned in my previous mail [1], I suggest we leave this until the hrtimer issue has been resolved. From what I've seen during the bisection I suspect it is just a side-effect. Cheers, FJP [1] <200903090253.34173.elendil@xxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-s390" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
