Use devm_clk_get_enabled() instead of clk functions in rtc-at91rm9200.
Signed-off-by: Liao Yuanhong <liaoyuanhong@xxxxxxxx>
---
drivers/rtc/rtc-at91rm9200.c | 18 +++---------------
1 file changed, 3 insertions(+), 15 deletions(-)
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index c16fe711a0d9..81b2556930bb 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -498,14 +498,9 @@ static int __init at91_rtc_probe(struct platform_device *pdev)
return PTR_ERR(rtc);
platform_set_drvdata(pdev, rtc);
- sclk = devm_clk_get(&pdev->dev, NULL);
+ sclk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(sclk))
return PTR_ERR(sclk);
-
- ret = clk_prepare_enable(sclk);
- if (ret) {
- dev_err(&pdev->dev, "Could not enable slow clock\n");
- return ret;
}
at91_rtc_write(AT91_RTC_CR, 0);
@@ -521,7 +516,7 @@ static int __init at91_rtc_probe(struct platform_device *pdev)
"at91_rtc", pdev);
if (ret) {
dev_err(&pdev->dev, "IRQ %d already in use.\n", irq);
- goto err_clk;
+ return ret;
}
/* cpu init code should really have flagged this device as
@@ -539,7 +534,7 @@ static int __init at91_rtc_probe(struct platform_device *pdev)
rtc->range_max = RTC_TIMESTAMP_END_2099;
ret = devm_rtc_register_device(rtc);
if (ret)
- goto err_clk;
+ return ret;
/* enable SECEV interrupt in order to initialize at91_rtc_upd_rdy
* completion.
@@ -548,11 +543,6 @@ static int __init at91_rtc_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "AT91 Real Time Clock driver.\n");
return 0;
-
-err_clk:
- clk_disable_unprepare(sclk);
-
- return ret;
}
/*
@@ -564,8 +554,6 @@ static void __exit at91_rtc_remove(struct platform_device *pdev)
at91_rtc_write_idr(AT91_RTC_ACKUPD | AT91_RTC_ALARM |
AT91_RTC_SECEV | AT91_RTC_TIMEV |
AT91_RTC_CALEV);
-
- clk_disable_unprepare(sclk);
}
static void at91_rtc_shutdown(struct platform_device *pdev)
--
2.25.1
