From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
Some RTC devices like the RV3028 have BSM disabled as factory default.
This makes the RTC quite useless if it is expected to preserve the
time on hardware that has a battery buffered supply for the RTC.
Let boards that have a buffered supply for the RTC available force
the BSM to the desired value via devicetree by setting the
'backup-switch-mode' property.
Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
---
drivers/rtc/class.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/drivers/rtc/class.c b/drivers/rtc/class.c
index e5b7b48cffac..79417d1fbeee 100644
--- a/drivers/rtc/class.c
+++ b/drivers/rtc/class.c
@@ -391,6 +391,11 @@ int __devm_rtc_register_device(struct module *owner, struct rtc_device *rtc)
struct rtc_wkalrm alrm;
int err;
+ struct rtc_param bsm = {
+ .param = RTC_PARAM_BACKUP_SWITCH_MODE,
+ .uvalue = RTC_BSM_DISABLED,
+ };
+
if (!rtc->ops) {
dev_dbg(&rtc->dev, "no ops set\n");
return -EINVAL;
@@ -402,6 +407,15 @@ int __devm_rtc_register_device(struct module *owner, struct rtc_device *rtc)
if (rtc->ops->set_offset)
set_bit(RTC_FEATURE_CORRECTION, rtc->features);
+ /* setup backup switching mode */
+ if (test_bit(RTC_FEATURE_BACKUP_SWITCH_MODE, rtc->features) &&
+ !device_property_read_u32(rtc->dev.parent, "backup-switch-mode",
+ (u32 *)&bsm.uvalue)) {
+ err = rtc->ops->param_set(rtc->dev.parent, &bsm);
+ if (err && err != -EINVAL)
+ return err;
+ }
+
rtc->owner = owner;
rtc_device_get_offset(rtc);
--
2.39.1
