If the alarms are disabled the topmost bit (AEN_*) is set in the alarm
registers. This is also interpreted in BCD number leading to this warning:
rtc rtc0: invalid alarm value: 2022-09-21T80:80:80
Fix this by masking alarm enabling and reserved bits.
Fixes: 05cb3a56ee8c ("rtc: pcf85063: add alarm support")
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
drivers/rtc/rtc-pcf85063.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/rtc/rtc-pcf85063.c b/drivers/rtc/rtc-pcf85063.c
index 095891999da1..99f9cc57c7b3 100644
--- a/drivers/rtc/rtc-pcf85063.c
+++ b/drivers/rtc/rtc-pcf85063.c
@@ -169,10 +169,10 @@ static int pcf85063_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
if (ret)
return ret;
- alrm->time.tm_sec = bcd2bin(buf[0]);
- alrm->time.tm_min = bcd2bin(buf[1]);
- alrm->time.tm_hour = bcd2bin(buf[2]);
- alrm->time.tm_mday = bcd2bin(buf[3]);
+ alrm->time.tm_sec = bcd2bin(buf[0] & 0x7f);
+ alrm->time.tm_min = bcd2bin(buf[1] & 0x7f);
+ alrm->time.tm_hour = bcd2bin(buf[2] & 0x3f);
+ alrm->time.tm_mday = bcd2bin(buf[3] & 0x3f);
ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &val);
if (ret)
--
2.25.1
