Hi,
On 30/08/2022 12:01:48+0200, Rasmus Villemoes wrote:
> These instances of '&client->dev' might as well be spelled 'dev', since
> 'client' has been computed from 'dev' via 'client =
> to_i2c_client(dev)'.
>
> Later patches will get rid of that local variable 'client', so remove
> these unnecessary references so those later patches become easier to
> read.
>
> Signed-off-by: Rasmus Villemoes <linux@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/rtc/rtc-isl12022.c | 11 +++++------
> 1 file changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/rtc/rtc-isl12022.c b/drivers/rtc/rtc-isl12022.c
> index 2dc19061cf5f..5e6bb9153c89 100644
> --- a/drivers/rtc/rtc-isl12022.c
> +++ b/drivers/rtc/rtc-isl12022.c
> @@ -112,13 +112,13 @@ static int isl12022_rtc_read_time(struct device *dev, struct rtc_time *tm)
> return ret;
>
> if (buf[ISL12022_REG_SR] & (ISL12022_SR_LBAT85 | ISL12022_SR_LBAT75)) {
> - dev_warn(&client->dev,
> + dev_warn(dev,
While at it, I would prefer that one to also become a dev_dbg
> "voltage dropped below %u%%, "
> "date and time is not reliable.\n",
> buf[ISL12022_REG_SR] & ISL12022_SR_LBAT85 ? 85 : 75);
> }
>
> - dev_dbg(&client->dev,
> + dev_dbg(dev,
> "%s: raw data is sec=%02x, min=%02x, hr=%02x, "
> "mday=%02x, mon=%02x, year=%02x, wday=%02x, "
> "sr=%02x, int=%02x",
> @@ -141,7 +141,7 @@ static int isl12022_rtc_read_time(struct device *dev, struct rtc_time *tm)
> tm->tm_mon = bcd2bin(buf[ISL12022_REG_MO] & 0x1F) - 1;
> tm->tm_year = bcd2bin(buf[ISL12022_REG_YR]) + 100;
>
> - dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
> + dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
You probably want to convert that to %ptR
> "mday=%d, mon=%d, year=%d, wday=%d\n",
> __func__,
> tm->tm_sec, tm->tm_min, tm->tm_hour,
> @@ -158,7 +158,7 @@ static int isl12022_rtc_set_time(struct device *dev, struct rtc_time *tm)
> int ret;
> uint8_t buf[ISL12022_REG_DW + 1];
>
> - dev_dbg(&client->dev, "%s: secs=%d, mins=%d, hours=%d, "
> + dev_dbg(dev, "%s: secs=%d, mins=%d, hours=%d, "
ditto
> "mday=%d, mon=%d, year=%d, wday=%d\n",
> __func__,
> tm->tm_sec, tm->tm_min, tm->tm_hour,
> @@ -173,8 +173,7 @@ static int isl12022_rtc_set_time(struct device *dev, struct rtc_time *tm)
> /* Check if WRTC (write rtc enable) is set factory default is
> * 0 (not set) */
> if (!(buf[0] & ISL12022_INT_WRTC)) {
> - dev_info(&client->dev,
> - "init write enable and 24 hour format\n");
> + dev_info(dev, "init write enable and 24 hour format\n");
I guess that one should simply be removed
>
> /* Set the write enable bit. */
> ret = isl12022_write_reg(client,
> --
> 2.37.2
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
