Am Tue, 16 Mar 2021 13:30:36 +0200
schrieb Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>:
> On Tue, Mar 16, 2021 at 11:08:05AM +0100, Claudius Heine wrote:
> > From: Johannes Hahn <johannes-hahn@xxxxxxxxxxx>
> >
> > This allows the RX6110 driver to be automatically assigned to the
> > right device on the I2C bus.
>
> Thanks for all effort!
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
> after addressing the below comments.
>
> > Signed-off-by: Johannes Hahn <johannes-hahn@xxxxxxxxxxx>
> > Signed-off-by: Claudius Heine <ch@xxxxxxx>
>
> > Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
Claudius, just remove that. I guess just add yours and mention authors
in the code if they should receive some recognition.
Henning
> I think this is somehow confusing. Either you need to add
> Co-developed-by of the corresponding people, or remove SoB (because
> of From line), i.o.w seems like Co-dB tag is needed for Johannes or
> you and something should be done with Henning's SoB.
>
> > ---
> > drivers/rtc/rtc-rx6110.c | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/drivers/rtc/rtc-rx6110.c b/drivers/rtc/rtc-rx6110.c
> > index 79161d4c6ce4..29bd697f82cb 100644
> > --- a/drivers/rtc/rtc-rx6110.c
> > +++ b/drivers/rtc/rtc-rx6110.c
> > @@ -13,6 +13,7 @@
> > #include <linux/of_gpio.h>
> > #include <linux/regmap.h>
> > #include <linux/rtc.h>
>
> > +#include <linux/acpi.h>
>
> Usually it's not needed if you leave IDs always to be compiled.
> Instead mod_devicetable.h is used. But it's all up to you and
> maintainer.
>
> > #include <linux/of.h>
> > #include <linux/of_device.h>
> > #include <linux/spi/spi.h>
> > @@ -447,6 +448,14 @@ static int rx6110_i2c_probe(struct i2c_client
> > *client, return rx6110_probe(rx6110, &client->dev);
> > }
> >
> > +#ifdef CONFIG_ACPI
> > +static const struct acpi_device_id rx6110_i2c_acpi_match[] = {
> > + { "SECC6110", },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(acpi, rx6110_i2c_acpi_match);
> > +#endif
> > +
> > static const struct i2c_device_id rx6110_i2c_id[] = {
> > { "rx6110", 0 },
> > { }
> > @@ -456,6 +465,9 @@ MODULE_DEVICE_TABLE(i2c, rx6110_i2c_id);
> > static struct i2c_driver rx6110_i2c_driver = {
> > .driver = {
> > .name = RX6110_DRIVER_NAME,
> > +#ifdef CONFIG_ACPI
>
> This is implied by the stub ACPI_PTR() macro for ACPI=n case.
> I.o.w drop this ugly and redundant ifdeffery.
>
> > + .acpi_match_table =
> > ACPI_PTR(rx6110_i2c_acpi_match), +#endif
> > },
> > .probe = rx6110_i2c_probe,
> > .id_table = rx6110_i2c_id,
> > --
> > 2.30.1
> >
>
