On Tue, Mar 16, 2021 at 11:08:05AM +0100, Claudius Heine wrote:
> From: Johannes Hahn <johannes-hahn@xxxxxxxxxxx>
>
> This allows the RX6110 driver to be automatically assigned to the right
> device on the I2C bus.
Thanks for all effort!
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxx>
after addressing the below comments.
> Signed-off-by: Johannes Hahn <johannes-hahn@xxxxxxxxxxx>
> Signed-off-by: Claudius Heine <ch@xxxxxxx>
> Signed-off-by: Henning Schild <henning.schild@xxxxxxxxxxx>
I think this is somehow confusing. Either you need to add Co-developed-by of
the corresponding people, or remove SoB (because of From line), i.o.w seems
like Co-dB tag is needed for Johannes or you and something should be done with
Henning's SoB.
> ---
> drivers/rtc/rtc-rx6110.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
>
> diff --git a/drivers/rtc/rtc-rx6110.c b/drivers/rtc/rtc-rx6110.c
> index 79161d4c6ce4..29bd697f82cb 100644
> --- a/drivers/rtc/rtc-rx6110.c
> +++ b/drivers/rtc/rtc-rx6110.c
> @@ -13,6 +13,7 @@
> #include <linux/of_gpio.h>
> #include <linux/regmap.h>
> #include <linux/rtc.h>
> +#include <linux/acpi.h>
Usually it's not needed if you leave IDs always to be compiled.
Instead mod_devicetable.h is used. But it's all up to you and maintainer.
> #include <linux/of.h>
> #include <linux/of_device.h>
> #include <linux/spi/spi.h>
> @@ -447,6 +448,14 @@ static int rx6110_i2c_probe(struct i2c_client *client,
> return rx6110_probe(rx6110, &client->dev);
> }
>
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id rx6110_i2c_acpi_match[] = {
> + { "SECC6110", },
> + { },
> +};
> +MODULE_DEVICE_TABLE(acpi, rx6110_i2c_acpi_match);
> +#endif
> +
> static const struct i2c_device_id rx6110_i2c_id[] = {
> { "rx6110", 0 },
> { }
> @@ -456,6 +465,9 @@ MODULE_DEVICE_TABLE(i2c, rx6110_i2c_id);
> static struct i2c_driver rx6110_i2c_driver = {
> .driver = {
> .name = RX6110_DRIVER_NAME,
> +#ifdef CONFIG_ACPI
This is implied by the stub ACPI_PTR() macro for ACPI=n case.
I.o.w drop this ugly and redundant ifdeffery.
> + .acpi_match_table = ACPI_PTR(rx6110_i2c_acpi_match),
> +#endif
> },
> .probe = rx6110_i2c_probe,
> .id_table = rx6110_i2c_id,
> --
> 2.30.1
>
--
With Best Regards,
Andy Shevchenko
