When enable CONFIG_RTC_DRV_DS1374_WDT use as watchdog,
in suspend mode, watchdog is still working but no daemon
patting the watchdog. The system will reboot if timeout.
Add support suspend/resume for watchdog.
suspend: disable the watchdog
resume: disable existing watchdog, reload watchdog timer, enable watchdog
Signed-off-by: winton.liu <18502523564@xxxxxxx>
---
drivers/rtc/rtc-ds1374.c | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index 38a2e9e..642e31d 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -437,6 +437,29 @@ static void ds1374_wdt_ping(void)
pr_info("WD TICK FAIL!!!!!!!!!! %i\n", ret);
}
+static void ds1374_wdt_resume(void)
+{
+ int ret = -ENOIOCTLCMD;
+ int cr;
+
+ cr = i2c_smbus_read_byte_data(save_client, DS1374_REG_CR);
+
+ /* Disable any existing watchdog/alarm before setting the new one */
+ cr &= ~DS1374_REG_CR_WACE;
+
+ i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
+
+ /* Reload watchdog timer */
+ ds1374_wdt_ping();
+
+ /* Enable watchdog timer */
+ cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_WDALM;
+ cr &= ~DS1374_REG_CR_AIE;
+
+ ret = i2c_smbus_write_byte_data(save_client, DS1374_REG_CR, cr);
+
+}
+
static void ds1374_wdt_disable(void)
{
int ret = -ENOIOCTLCMD;
@@ -690,6 +713,10 @@ static int ds1374_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
+#ifdef CONFIG_RTC_DRV_DS1374_WDT
+ ds1374_wdt_disable();
+#endif
+
if (client->irq > 0 && device_may_wakeup(&client->dev))
enable_irq_wake(client->irq);
return 0;
@@ -699,6 +726,10 @@ static int ds1374_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
+#ifdef CONFIG_RTC_DRV_DS1374_WDT
+ ds1374_wdt_resume();
+#endif
+
if (client->irq > 0 && device_may_wakeup(&client->dev))
disable_irq_wake(client->irq);
return 0;
--
1.9.1
