On Tuesday 25 September 2007 19:35:35 Girish kathalagiri wrote: > Hi, > I am running Linux 2.6.21-rc4-rt1 on my IBM thinkpad T60 (I have > attached the cpuinfo). > When i run the hourglass ( http://www.cs.utah.edu/~regehr/hourglass/) > ,6 threads each of priority RTHIGH (maxpriority-2). > Only one thread (thread 0) seems to be running on cpu#0, all the other > thread seems to be competing with each other on cpu#1. > > command : ./hourglass -n 6 -a -d 60s -w CPU -i HR -p RTHIGH > here is a part of output from the hourglass test > ---------------------------------------------------------- > thread 0 will use high-res timers > thread 1 will use high-res timers > thread 2 will use high-res timers > thread 3 will use high-res timers > thread 4 will use high-res timers > thread 5 will use high-res timers > thread 0 will have priority RTHIGH > thread 1 will have priority RTHIGH > thread 2 will have priority RTHIGH > thread 3 will have priority RTHIGH > thread 4 will have priority RTHIGH > thread 5 will have priority RTHIGH > 8.010864 MB allocated for trace records > Hourglass 1.0.1b : 6 threads; 60.000000 seconds; 1828.999688 MHz > timestamp counter > max gap is 63980 cycles > this test will last for 60.000000 seconds > numthreads: 6 > work done by thrd 0 : 430394547 > work done by thrd 1 : 42208618 > work done by thrd 2 : 86995526 > work done by thrd 3 : 86819711 > work done by thrd 4 : 86887798 > work done by thrd 5 : 86101724 > > thread 0 recorded 60.040444 seconds (99.999946 %) > thread 1 recorded 12.037532 seconds (20.049028 %) > thread 2 recorded 12.030190 seconds (20.036800 %) > thread 3 recorded 12.005801 seconds (19.996179 %) > thread 4 recorded 12.015195 seconds (20.011824 %) > thread 5 recorded 11.907206 seconds (19.831964 %) > > --------------------------------------------------------------------------- >---- > > Should not the threads be schedule fairly between the two cpu's, like > say ,3 threads competing for cpu#0 and other 3 for cpu#1 ? > Or Am i missing something here ? 1) How are you determining which CPUs these threads spend their time on? 2) RTHIGH doesn't do anything for us. What is the value of the SCHED_FIFO priority those threads run at? Is it the same for every one? Note that depending on exactly what those threads do (I am unfamiliar with the hourglass testcase) it isn't unreasonable for them to all run on the same CPU if their runnable/sleeping states happen to line up just right. It is also very possible that they bounce around from CPU to CPU in rapid succession if the runnable/sleeping windows overlap in exactly the wrong way :-) -- Darren Hart IBM Linux Technology Center Realtime Linux Team - To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
