Thanks Johan for your valuable comments.
On Wed, Apr 8, 2020 at 6:19 PM Johan Jonker <jbx6244@xxxxxxxxx> wrote:
>
> Hi Karthik and others,
>
> Include all mail lists found with:
> ./scripts/get_maintainer.pl --nogit-fallback --nogit
>
> Helen is moving isp1 bindings out of staging.
> Clocks and other things don't fit with her patch serie.
> Maybe fix this while still in staging?
>
> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
> 'phys' is a required property
> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
> 'phy-names' is a required property
> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
> 'ports' is a required property
>
> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
> 'assigned-clock-rates', 'assigned-clocks'
> do not match any of the regexes: 'pinctrl-[0-9]+'
> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
> clock-names:2: 'aclk_isp_wrap' was expected
> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
> clock-names:3: 'hclk_isp' was expected
> arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
> clock-names:4: 'hclk_isp_wrap' was expected
>
> arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: 'power-domains'
> is a required property
>
> arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: clock-names:1:
> 'dphy-cfg' was expected
> arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: clock-names:
> ['dphy-ref', 'pclk'] is too short
> arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: clocks: [[7,
> 126], [7, 358]] is too short
>
>
> Inside yaml:
> Use enum and sort.
> >> properties:
> >> compatible:
>
> >> const: rockchip,rk3399-cif-isp
> >> + const: rockchip,rk3288-rkisp1
>
> enum:
> - rockchip,rk3288-rkisp1
> - rockchip,rk3399-cif-isp
>
> >> properties:
> >> compatible:
> >> const: rockchip,rk3399-mipi-dphy-rx0
> >> + const: rockchip,rk3288-mipi-dphy-rx0
>
> enum:
> - rockchip,rk3288-mipi-dphy-rx0
> - rockchip,rk3399-mipi-dphy-rx0
>
> >
> > Please, keep consistency, or rk3288-cif-isp, or we change rk3399-cif-isp to be rk3399-rkisp1.
>
>
> On 4/6/20 9:30 AM, Karthik Poduval wrote:
> > ISP and DPHY device entries missing so add them.
> >
>
> > tested on tinkerbaord with ov5647 using command
> > cam -c 1 -C -F cap
>
> Disclose dts node for ov5647 in cover letter, so people can reproduce
> this experiment.
>
> Caution!
> Without dts node this command doesn't work correct.
>
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml
>
> make ARCH=arm dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml
>
> Needed to detect missing: phys, phy-names and ports ,etc.
>
> &isp {
> status = "okay";
> };
>
Makes sense, that's why my kernel compilation passed and I didn't
these errors. Thanks for the command, I will verify dts for
correctness in next patch series.
> Needed to detect missing: power-domains, etc.
>
> &mipi_phy_rx0 {
> status = "okay";
> };
>
> >
> > Reported-by: Karthik Poduval <karthik.poduval@xxxxxxxxx>
> > Signed-off-by: Karthik Poduval <karthik.poduval@xxxxxxxxx>
> > ---
> > arch/arm/boot/dts/rk3288.dtsi | 25 +++++++++++++++++++++++++
> > 1 file changed, 25 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> > index 9beb662166aa..adea8189abd9 100644
> > --- a/arch/arm/boot/dts/rk3288.dtsi
> > +++ b/arch/arm/boot/dts/rk3288.dtsi
> > @@ -247,6 +247,23 @@
> > ports = <&vopl_out>, <&vopb_out>;
> > };
> >
>
> > + isp: isp@ff910000 {
>
> For nodes:
> Sort things without reg alphabetical first,
> then sort the rest by reg address.
>
Sure
> > + compatible = "rockchip,rk3288-rkisp1";
> > + reg = <0x0 0xff910000 0x0 0x4000>;
> > + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cru SCLK_ISP>, <&cru ACLK_ISP>,
> > + <&cru HCLK_ISP>, <&cru PCLK_ISP_IN>,
> > + <&cru SCLK_ISP_JPE>;
> > + clock-names = "clk_isp", "aclk_isp",
> > + "hclk_isp", "pclk_isp_in",
> > + "sclk_isp_jpe";
> > + assigned-clocks = <&cru SCLK_ISP>, <&cru SCLK_ISP_JPE>;
> > + assigned-clock-rates = <400000000>, <400000000>;
>
> > + power-domains = <&power RK3288_PD_VIO>;
> > + iommus = <&isp_mmu>;
>
> sort
>
> Something missing?
> Where are the ports and port nodes?
I was assuming that this would be a part of the board specific dtsi or
dts entry where the isp node would be overriden and the i2c camera
port
and the isp port remote-endpoints would be connected. I had this as a
part of my first patch series. However I was advised by Helen to not
include the ov5647
dtsi as it isn't hardwired to the SoC and resides on an camera adapter board.
Should this be defined without the remote-endpoint phandle since we
don't know exactly which sensor gets connected in this dtsi file ?
>
> > + status = "disabled";
> > + };
> > +
> > sdmmc: mmc@ff0c0000 {
> > compatible = "rockchip,rk3288-dw-mshc";
> > max-frequency = <150000000>;
> > @@ -891,6 +908,14 @@
> > status = "disabled";
> > };
> >
>
> > + mipi_phy_rx0: mipi-phy-rx0 {
>
> Use separate patch.
>
> For nodes:
> Sort things without reg alphabetical first,
> then sort the rest by reg address.
>
Sure
> > + compatible = "rockchip,rk3288-mipi-dphy-rx0";
> > + clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_CSI>;
> > + clock-names = "dphy-ref", "pclk";
> Something missing?
> Does this phy have a power domain?
The tinkerboard debian kernel (where I referred to for this patch)
didn't have it defined for the DPHY. I would guess that it would be
the same as the ISP i.e. RK3288_PD_VIO,
does anyone know the answer to this or do I have to reach out to
Rockchip engineering ?
>
> > + #phy-cells = <0>;
> > + status = "disabled";
> > + };
> > +
> > io_domains: io-domains {
> > compatible = "rockchip,rk3288-io-voltage-domain";
> > status = "disabled";
> >
>
--
Regards,
Karthik Poduval
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
