Hi Karthik and others,
Include all mail lists found with:
./scripts/get_maintainer.pl --nogit-fallback --nogit
Helen is moving isp1 bindings out of staging.
Clocks and other things don't fit with her patch serie.
Maybe fix this while still in staging?
arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
'phys' is a required property
arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
'phy-names' is a required property
arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
'ports' is a required property
arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
'assigned-clock-rates', 'assigned-clocks'
do not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
clock-names:2: 'aclk_isp_wrap' was expected
arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
clock-names:3: 'hclk_isp' was expected
arch/arm/boot/dts/rk3288-tinker.dt.yaml: isp@ff910000:
clock-names:4: 'hclk_isp_wrap' was expected
arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: 'power-domains'
is a required property
arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: clock-names:1:
'dphy-cfg' was expected
arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: clock-names:
['dphy-ref', 'pclk'] is too short
arch/arm/boot/dts/rk3288-tinker.dt.yaml: mipi-phy-rx0: clocks: [[7,
126], [7, 358]] is too short
Inside yaml:
Use enum and sort.
>> properties:
>> compatible:
>> const: rockchip,rk3399-cif-isp
>> + const: rockchip,rk3288-rkisp1
enum:
- rockchip,rk3288-rkisp1
- rockchip,rk3399-cif-isp
>> properties:
>> compatible:
>> const: rockchip,rk3399-mipi-dphy-rx0
>> + const: rockchip,rk3288-mipi-dphy-rx0
enum:
- rockchip,rk3288-mipi-dphy-rx0
- rockchip,rk3399-mipi-dphy-rx0
>
> Please, keep consistency, or rk3288-cif-isp, or we change rk3399-cif-isp to be rk3399-rkisp1.
On 4/6/20 9:30 AM, Karthik Poduval wrote:
> ISP and DPHY device entries missing so add them.
>
> tested on tinkerbaord with ov5647 using command
> cam -c 1 -C -F cap
Disclose dts node for ov5647 in cover letter, so people can reproduce
this experiment.
Caution!
Without dts node this command doesn't work correct.
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/media/rockchip-isp1.yaml
make ARCH=arm dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/rockchip-mipi-dphy-rx0.yaml
Needed to detect missing: phys, phy-names and ports ,etc.
&isp {
status = "okay";
};
Needed to detect missing: power-domains, etc.
&mipi_phy_rx0 {
status = "okay";
};
>
> Reported-by: Karthik Poduval <karthik.poduval@xxxxxxxxx>
> Signed-off-by: Karthik Poduval <karthik.poduval@xxxxxxxxx>
> ---
> arch/arm/boot/dts/rk3288.dtsi | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index 9beb662166aa..adea8189abd9 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -247,6 +247,23 @@
> ports = <&vopl_out>, <&vopb_out>;
> };
>
> + isp: isp@ff910000 {
For nodes:
Sort things without reg alphabetical first,
then sort the rest by reg address.
> + compatible = "rockchip,rk3288-rkisp1";
> + reg = <0x0 0xff910000 0x0 0x4000>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&cru SCLK_ISP>, <&cru ACLK_ISP>,
> + <&cru HCLK_ISP>, <&cru PCLK_ISP_IN>,
> + <&cru SCLK_ISP_JPE>;
> + clock-names = "clk_isp", "aclk_isp",
> + "hclk_isp", "pclk_isp_in",
> + "sclk_isp_jpe";
> + assigned-clocks = <&cru SCLK_ISP>, <&cru SCLK_ISP_JPE>;
> + assigned-clock-rates = <400000000>, <400000000>;
> + power-domains = <&power RK3288_PD_VIO>;
> + iommus = <&isp_mmu>;
sort
Something missing?
Where are the ports and port nodes?
> + status = "disabled";
> + };
> +
> sdmmc: mmc@ff0c0000 {
> compatible = "rockchip,rk3288-dw-mshc";
> max-frequency = <150000000>;
> @@ -891,6 +908,14 @@
> status = "disabled";
> };
>
> + mipi_phy_rx0: mipi-phy-rx0 {
Use separate patch.
For nodes:
Sort things without reg alphabetical first,
then sort the rest by reg address.
> + compatible = "rockchip,rk3288-mipi-dphy-rx0";
> + clocks = <&cru SCLK_MIPIDSI_24M>, <&cru PCLK_MIPI_CSI>;
> + clock-names = "dphy-ref", "pclk";
Something missing?
Does this phy have a power domain?
> + #phy-cells = <0>;
> + status = "disabled";
> + };
> +
> io_domains: io-domains {
> compatible = "rockchip,rk3288-io-voltage-domain";
> status = "disabled";
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
