Re: [PATCH 4/4] arm64: dts: rockchip: add isp0 node for rk3399

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 4/2/20 9:46 PM, Helen Koike wrote:
> 
> 
> On 4/2/20 2:20 PM, Johan Jonker wrote:
>> Hi Helen,
>>
>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>>> index fc0295d2a65a1..815099a0cd0dd 100644
>>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>>> @@ -1718,6 +1718,33 @@ vopb_mmu: iommu@ff903f00 {
>>>  		status = "disabled";
>>>  	};
>>>  
>>> +	isp0: isp0@ff910000 {
>>> +		compatible = "rockchip,rk3399-cif-isp";
>>> +		reg = <0x0 0xff910000 0x0 0x4000>;
>>> +		interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
>>> +		clocks = <&cru SCLK_ISP0>,
>>> +			 <&cru ACLK_ISP0>, <&cru ACLK_ISP0_WRAPPER>,
>>> +			 <&cru HCLK_ISP0>, <&cru HCLK_ISP0_WRAPPER>;
>>> +		clock-names = "clk_isp",
>>> +			      "aclk_isp", "aclk_isp_wrap",
>>> +			      "hclk_isp", "hclk_isp_wrap";
>>
>>> +		power-domains = <&power RK3399_PD_ISP0>;
>>> +		iommus = <&isp0_mmu>;
>>> +		phys = <&mipi_dphy_rx0>;
>>> +		phy-names = "dphy";
>>
>> Maybe a little sort? But keep rest as it is. Also in example.
>>
>> 		iommus = <&isp0_mmu>;
>> 		phys = <&mipi_dphy_rx0>;
>> 		phy-names = "dphy";
>> 		power-domains = <&power RK3399_PD_ISP0>;
> 
> Are you proposing only to move power-domains after phy? And keep the rest?
> What is the main logic?

There is no hard rule... It mostly depend on Heiko...

For nodes:
Sort things without reg alphabetical first,
then sort the rest by reg address.

Inside nodes:
If exists on top: compatible, reg and interrupts.
In alphabetical order the required properties.
Then in alphabetical order the other properties.
And as last things that start with '#' in alphabetical order.

> 
> Thanks
> Helen
> 
>>
>>> +
>>> +		ports {
>>> +			#address-cells = <1>;
>>> +			#size-cells = <0>;
>>> +
>>> +			port@0 {
>>
>>> +				#address-cells = <1>;
>>> +				#size-cells = <0>;
>>> +				reg = <0>;
>>
>> Move reg above #address-cells. Change that in example as well.
>>
>> 				reg = <0>;
>> 				#address-cells = <1>;
>> 				#size-cells = <0>;
>>
>>> +			};
>>> +		};
>>> +	};
>>> +
>>>  	isp0_mmu: iommu@ff914000 {
>>>  		compatible = "rockchip,iommu";
>>>  		reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
>>> -- 
>>> 2.26.0
>>


_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux