Hi Markus, Levin and all,
rk3399-roc-pc board has three on-board LED's:
1. work-led(green) assigned as linux,default-trigger = "heartbeat"
2. diy-led(red) assigned as linux,default-trigger = "mmc1" ---- which is emmc
3. yellow-led(yellow) assigned as linux,default-trigger = "mmc0" ----
which is SD
I have a requirement where diy-led(red) should be on while linux
boots and until poweroff, indicating
full power mode.
here are my questions:
1. Since diy-led(red) is already assigned to mmc1, how could I achieve
the above requirement.
In the diy-led node I changed default-state to "on", but it didn't work.
2. Is there any specific reason why diy-led(red) is assigned to mmc1 ?
3. Is it possible to swap work-led with diy-led, meaning work-led
assigned to "mmc1" and diy-led
assigned as "heartbeat" or "default-on" ?
Please suggest/comment on my requirement.
Thanks and regards
Suniel
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
