On 21/01/2020 1:45 pm, Heiko Stuebner wrote:
From: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx>
The lvds controller has two ports. port@0 for the connection
to the display controller(s) and port@1 for the connection to
the panel, so should have a ports node covering the port@x nodes.
Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/px30.dtsi | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi
index 9b1c92132007..37e014444214 100644
--- a/arch/arm64/boot/dts/rockchip/px30.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30.dtsi
@@ -421,19 +421,24 @@ lvds: lvds {
rockchip,output = "lvds";
status = "disabled";
FWIW, the main node's "#{address,size}-cells" properties above here
should now be unnecessary too.
Robin.
- port@0 {
- reg = <0>;
+ ports {
#address-cells = <1>;
#size-cells = <0>;
- lvds_vopb_in: endpoint@0 {
+ port@0 {
reg = <0>;
- remote-endpoint = <&vopb_out_lvds>;
- };
-
- lvds_vopl_in: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_lvds>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ lvds_vopb_in: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_lvds>;
+ };
+
+ lvds_vopl_in: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_lvds>;
+ };
};
};
};
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
