Hi Jolly,
> -----Original Message-----
> From: Jolly Shah
> Sent: Monday, July 1, 2019 11:36 PM
> To: Manish Narani <MNARANI@xxxxxxxxxx>; ulf.hansson@xxxxxxxxxx;
> robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; heiko@xxxxxxxxx; Michal Simek
> <michals@xxxxxxxxxx>; adrian.hunter@xxxxxxxxx;
> christoph.muellner@xxxxxxxxxxxxxxxxxxxxx; philipp.tomsich@theobroma-
> systems.com; viresh.kumar@xxxxxxxxxx; scott.branden@xxxxxxxxxxxx;
> ayaka@xxxxxxxxxxx; kernel@xxxxxxxx; tony.xie@xxxxxxxxxxxxxx; Rajan Vaja
> <RAJANV@xxxxxxxxxx>; Nava kishore Manne <navam@xxxxxxxxxx>;
> mdf@xxxxxxxxxx; Manish Narani <MNARANI@xxxxxxxxxx>; olof@xxxxxxxxx
> Cc: linux-mmc@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> rockchip@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [PATCH v2 09/11] firmware: xilinx: Add SDIO Tap Delay APIs
>
> Hi Manish,
>
> > -----Original Message-----
> > From: Manish Narani <manish.narani@xxxxxxxxxx>
> > Sent: Sunday, June 30, 2019 10:30 PM
> > To: ulf.hansson@xxxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx;
> > heiko@xxxxxxxxx; Michal Simek <michals@xxxxxxxxxx>;
> > adrian.hunter@xxxxxxxxx; christoph.muellner@xxxxxxxxxxxxxxxxxxxxx;
> > philipp.tomsich@xxxxxxxxxxxxxxxxxxxxx; viresh.kumar@xxxxxxxxxx;
> > scott.branden@xxxxxxxxxxxx; ayaka@xxxxxxxxxxx; kernel@xxxxxxxx;
> > tony.xie@xxxxxxxxxxxxxx; Rajan Vaja <RAJANV@xxxxxxxxxx>; Jolly Shah
> > <JOLLYS@xxxxxxxxxx>; Nava kishore Manne <navam@xxxxxxxxxx>;
> > mdf@xxxxxxxxxx; Manish Narani <MNARANI@xxxxxxxxxx>; olof@xxxxxxxxx
> > Cc: linux-mmc@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> > rockchip@xxxxxxxxxxxxxxxxxxx
> > Subject: [PATCH v2 09/11] firmware: xilinx: Add SDIO Tap Delay APIs
> >
> > Add APIs for setting SDIO Tap Delays on ZynqMP platform.
> >
> > Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx>
> > ---
> > drivers/firmware/xilinx/zynqmp.c | 48
> > ++++++++++++++++++++++++++++++++++++
> > include/linux/firmware/xlnx-zynqmp.h | 15 ++++++++++-
> > 2 files changed, 62 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/firmware/xilinx/zynqmp.c
> b/drivers/firmware/xilinx/zynqmp.c
> > index fd3d837..b81f1be 100644
> > --- a/drivers/firmware/xilinx/zynqmp.c
> > +++ b/drivers/firmware/xilinx/zynqmp.c
> > @@ -664,6 +664,52 @@ static int zynqmp_pm_set_requirement(const u32
> > node, const u32 capabilities,
> > qos, ack, NULL);
> > }
> >
> > +/**
> > + * zynqmp_pm_sdio_out_setphase() - PM call to set clock output delays for
> SD
> > + * @device_id: Device ID of the SD controller
> > + * @tap_delay: Tap Delay value for output clock
> > + *
> > + * This API function is to be used for setting the clock output delays for SD
> > + * clock.
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_sdio_out_setphase(u32 device_id, u8 tap_delay)
> > +{
> > + u32 node_id = (!device_id) ? NODE_SD_0 : NODE_SD_1;
> > + int ret;
> > +
> > + ret = zynqmp_pm_ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> > + PM_TAPDELAY_OUTPUT, tap_delay, NULL);
> > + if (ret)
> > + pr_err("Error setting Output Tap Delay\n");
> > +
> > + return ret;
> > +}
> > +
> > +/**
> > + * zynqmp_pm_sdio_in_setphase() - PM call to set clock input delays for SD
> > + * @device_id: Device ID of the SD controller
> > + * @tap_delay: Tap Delay value for input clock
> > + *
> > + * This API function is to be used for setting the clock input delays for SD
> > + * clock.
> > + *
> > + * Return: Returns status, either success or error+reason
> > + */
> > +static int zynqmp_pm_sdio_in_setphase(u32 device_id, u8 tap_delay)
> > +{
> > + u32 node_id = (!device_id) ? NODE_SD_0 : NODE_SD_1;
> > + int ret;
> > +
> > + ret = zynqmp_pm_ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> > + PM_TAPDELAY_INPUT, tap_delay, NULL);
> > + if (ret)
> > + pr_err("Error setting Input Tap Delay\n");
> > +
> > + return ret;
> > +}
> > +
> > static const struct zynqmp_eemi_ops eemi_ops = {
> > .get_api_version = zynqmp_pm_get_api_version,
> > .get_chipid = zynqmp_pm_get_chipid,
> > @@ -687,6 +733,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
> > .set_requirement = zynqmp_pm_set_requirement,
> > .fpga_load = zynqmp_pm_fpga_load,
> > .fpga_get_status = zynqmp_pm_fpga_get_status,
> > + .sdio_out_setphase = zynqmp_pm_sdio_out_setphase,
> > + .sdio_in_setphase = zynqmp_pm_sdio_in_setphase,
>
> Are these eemi APIs? You are using ioctl eemi api to set the delay.
Yes, I am making these eemi APIs and calling ioctl API from these. This is to make the SD driver code more readable.
Thanks,
Manish
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
