Hi Manish,
> -----Original Message-----
> From: Manish Narani <manish.narani@xxxxxxxxxx>
> Sent: Sunday, June 30, 2019 10:30 PM
> To: ulf.hansson@xxxxxxxxxx; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx;
> heiko@xxxxxxxxx; Michal Simek <michals@xxxxxxxxxx>;
> adrian.hunter@xxxxxxxxx; christoph.muellner@xxxxxxxxxxxxxxxxxxxxx;
> philipp.tomsich@xxxxxxxxxxxxxxxxxxxxx; viresh.kumar@xxxxxxxxxx;
> scott.branden@xxxxxxxxxxxx; ayaka@xxxxxxxxxxx; kernel@xxxxxxxx;
> tony.xie@xxxxxxxxxxxxxx; Rajan Vaja <RAJANV@xxxxxxxxxx>; Jolly Shah
> <JOLLYS@xxxxxxxxxx>; Nava kishore Manne <navam@xxxxxxxxxx>;
> mdf@xxxxxxxxxx; Manish Narani <MNARANI@xxxxxxxxxx>; olof@xxxxxxxxx
> Cc: linux-mmc@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> rockchip@xxxxxxxxxxxxxxxxxxx
> Subject: [PATCH v2 09/11] firmware: xilinx: Add SDIO Tap Delay APIs
>
> Add APIs for setting SDIO Tap Delays on ZynqMP platform.
>
> Signed-off-by: Manish Narani <manish.narani@xxxxxxxxxx>
> ---
> drivers/firmware/xilinx/zynqmp.c | 48
> ++++++++++++++++++++++++++++++++++++
> include/linux/firmware/xlnx-zynqmp.h | 15 ++++++++++-
> 2 files changed, 62 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index fd3d837..b81f1be 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -664,6 +664,52 @@ static int zynqmp_pm_set_requirement(const u32
> node, const u32 capabilities,
> qos, ack, NULL);
> }
>
> +/**
> + * zynqmp_pm_sdio_out_setphase() - PM call to set clock output delays for SD
> + * @device_id: Device ID of the SD controller
> + * @tap_delay: Tap Delay value for output clock
> + *
> + * This API function is to be used for setting the clock output delays for SD
> + * clock.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_sdio_out_setphase(u32 device_id, u8 tap_delay)
> +{
> + u32 node_id = (!device_id) ? NODE_SD_0 : NODE_SD_1;
> + int ret;
> +
> + ret = zynqmp_pm_ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> + PM_TAPDELAY_OUTPUT, tap_delay, NULL);
> + if (ret)
> + pr_err("Error setting Output Tap Delay\n");
> +
> + return ret;
> +}
> +
> +/**
> + * zynqmp_pm_sdio_in_setphase() - PM call to set clock input delays for SD
> + * @device_id: Device ID of the SD controller
> + * @tap_delay: Tap Delay value for input clock
> + *
> + * This API function is to be used for setting the clock input delays for SD
> + * clock.
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_sdio_in_setphase(u32 device_id, u8 tap_delay)
> +{
> + u32 node_id = (!device_id) ? NODE_SD_0 : NODE_SD_1;
> + int ret;
> +
> + ret = zynqmp_pm_ioctl(node_id, IOCTL_SET_SD_TAPDELAY,
> + PM_TAPDELAY_INPUT, tap_delay, NULL);
> + if (ret)
> + pr_err("Error setting Input Tap Delay\n");
> +
> + return ret;
> +}
> +
> static const struct zynqmp_eemi_ops eemi_ops = {
> .get_api_version = zynqmp_pm_get_api_version,
> .get_chipid = zynqmp_pm_get_chipid,
> @@ -687,6 +733,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
> .set_requirement = zynqmp_pm_set_requirement,
> .fpga_load = zynqmp_pm_fpga_load,
> .fpga_get_status = zynqmp_pm_fpga_get_status,
> + .sdio_out_setphase = zynqmp_pm_sdio_out_setphase,
> + .sdio_in_setphase = zynqmp_pm_sdio_in_setphase,
Are these eemi APIs? You are using ioctl eemi api to set the delay.
Thanks,
Jolly Shah
> };
>
> /**
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-
> zynqmp.h
> index 1262ea6..d9b53e5 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -92,7 +92,8 @@ enum pm_ret_status {
> };
>
> enum pm_ioctl_id {
> - IOCTL_SET_PLL_FRAC_MODE = 8,
> + IOCTL_SET_SD_TAPDELAY = 7,
> + IOCTL_SET_PLL_FRAC_MODE,
> IOCTL_GET_PLL_FRAC_MODE,
> IOCTL_SET_PLL_FRAC_DATA,
> IOCTL_GET_PLL_FRAC_DATA,
> @@ -251,6 +252,16 @@ enum zynqmp_pm_request_ack {
> ZYNQMP_PM_REQUEST_ACK_NON_BLOCKING,
> };
>
> +enum pm_node_id {
> + NODE_SD_0 = 39,
> + NODE_SD_1,
> +};
> +
> +enum tap_delay_type {
> + PM_TAPDELAY_INPUT = 0,
> + PM_TAPDELAY_OUTPUT,
> +};
> +
> /**
> * struct zynqmp_pm_query_data - PM query data
> * @qid: query ID
> @@ -295,6 +306,8 @@ struct zynqmp_eemi_ops {
> const u32 capabilities,
> const u32 qos,
> const enum zynqmp_pm_request_ack ack);
> + int (*sdio_out_setphase)(u32 device_id, u8 tap_delay);
> + int (*sdio_in_setphase)(u32 device_id, u8 tap_delay);
> };
>
> int zynqmp_pm_invoke_fn(u32 pm_api_id, u32 arg0, u32 arg1,
> --
> 2.1.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
