Hi Jianqun,
Am Donnerstag, 30. Mai 2019, 02:08:48 CEST schrieb Jianqun Xu:
> This patch adds core dtsi file for Rockchip RK3399Pro SoCs,
> include rk3399.dtsi. Also enable pciei0/pcie_phy for AP to
> talk to NPU part inside SoC.
>
> Signed-off-by: Jianqun Xu <jay.xu@xxxxxxxxxxxxxx>
could you add the necessary pinctrl entry, as suggested by Manivannan?
Thanks
Heiko
> ---
> changes since v2:
> - only enable pcie0 and pcie_phy nodes, thanks for Heiko and manivannan
>
> changes since v1:
> - remove dfi and dmc
>
> arch/arm64/boot/dts/rockchip/rk3399pro.dtsi | 22 +++++++++++++++++++++
> 1 file changed, 22 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
> new file mode 100644
> index 000000000000..bb5ebf6608b9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro.dtsi
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> +
> +#include "rk3399.dtsi"
> +
> +/ {
> + compatible = "rockchip,rk3399pro";
> +};
> +
> +/* Default to enabled since AP talk to NPU part over pcie */
> +&pcie_phy {
> + status = "okay";
> +};
> +
> +/* Default to enabled since AP talk to NPU part over pcie */
> +&pcie0 {
> + ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
> + num-lanes = <4>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pcie_clkreqn_cpm>;
> + status = "okay";
> +};
>
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
