On 2019-04-10 17:45, Doug Anderson wrote:
> Hi,
>
> On Fri, Mar 29, 2019 at 2:55 PM Douglas Anderson <dianders@xxxxxxxxxxxx> wrote:
>> It appears that there is a typo in the rk3288 TRM. For
>> GRF_SOC_CON0[7] it says that 0 means "vepu" and 1 means "vdpu". It's
>> the other way around.
>>
>> How do I know? Here's my evidence:
>>
>> 1. Prior to commit 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec
>> using the new muxgrf type on rk3288") we always pretended that we
>> were using "aclk_vdpu" and the comment in the code said that this
>> matched the default setting in the system. In fact the default
>> setting is 0 according to the TRM and according to reading memory
>> at bootup. In addition rk3288-based Chromebooks ran like this and
>> the video codecs worked.
>> 2. With the existing clock code if you boot up and try to enable the
>> new VIDEO_ROCKCHIP_VPU as a module (and without "clk_ignore_unused"
>> on the command line), you get errors like "failed to get ack on
>> domain 'pd_video', val=0x80208". After flipping vepu/vdpu things
>> init OK.
>> 3. If I export and add both the vepu and vdpu to the list of clocks
>> for RK3288_PD_VIDEO I can get past the power domain errors, but now
>> I freeze when the vpu_mmu gets initted.
>> 4. If I just mark the "vdpu" as IGNORE_UNUSED then everything boots up
>> and probes OK showing that somehow the "vdpu" was important to keep
>> enabled. This is because we were actually using it as a parent.
>> 5. After this change I can hack "aclk_vcodec_pre" to parent from
>> "aclk_vepu" using assigned-clocks and the video codec still probes
>> OK.
>>
>> Fixes: 4d3e84f99628 ("clk: rockchip: describe aclk_vcodec using the new muxgrf type on rk3288")
>> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
>> ---
>> I currently have no way to test the JPEG mem2mem driver, so hopefully
>> others can test this and make sure it's happy for them. I'm just
>> happy not to get strange errors at boot anymore.
>>
>> drivers/clk/rockchip/clk-rk3288.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
> Any thoughts about this patch? I'm 99.9% certain it's correct and
> it'd be nice to get it landed. Heiko: I assume you're still
> collecting Rockchip clock patches and would be the one to apply it and
> (at some point) send a pull request to the clock tree?
>
> -Doug
This clk fix is needed to make MPEG-2 decoding work on my RK3288 Tinker Board using the
rockchip vpu patchset and a patch to add RK3288 specific MPEG-2 code [1].
Also note that the same change was suggested in a previous patch [2] from by ayaka.
If possible please also add the CLK_SET_RATE_PARENT change from [3] in a possible v2,
that fixes assigning the aclk_vcodec clk to 400Mhz in the rockchip vpu driver.
[1] https://github.com/Kwiboo/linux-rockchip/commit/1f78093e05c7360515a185f48b7c5cb8ba1e3e15
[2] https://patchwork.kernel.org/patch/9725553/
[3] https://github.com/Kwiboo/linux-rockchip/commit/9216da3f1521a0be5889235abe7fa093a4894160
Regards,
Jonas
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
