Hello Mayama-san,
On 2019/03/08 1:18, Tomohiro Mayama wrote:
This patch makes USB ports functioning again.
Signed-off-by: Tomohiro Mayama <parly-gh@xxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 21107d0f4378..7f365e448867 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -45,8 +45,7 @@
vcc_host1_5v: vcc_otg_5v: vcc-host1-5v-regulator {
compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&usb20_host_drv>;
regulator-name = "vcc_host1_5v";
After this patch applied, USB and S/PDIF both work well.
Tested-by: Katsuhiro Suzuki <katsuhiro@xxxxxxxxxxxxx>
$ lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Best Regards,
Katsuhiro Suzuki
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip
