Hi Biju, On Tue, Jan 7, 2025 at 11:24 AM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote: > > Hi Prabhakar, > > Thanks for the patch. > > > -----Original Message----- > > From: Prabhakar <prabhakar.csengg@xxxxxxxxx> > > Sent: 02 January 2025 18:19 > > Subject: [PATCH v3 4/6] clk: renesas: rzv2h: Switch MSTOP configuration to per-bit basis > > > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> > > > > Switch MSTOP handling from group-based to per-bit configuration to address issues with shared > > dependencies between module clocks. In the current group-based configuration, multiple module clocks > > may rely on a single MSTOP bit. When both clocks are turned ON and one is subsequently turned OFF, the > > shared MSTOP bit will still be set, which is incorrect since the other dependent module clock remains > > ON. > > I guess this statement is incorrect. Still in group-based, mstop bit is controlled by usage count(ref_cnt). > It is valid, consider an example say IP-A reuiqres MSTOP bits 8 | 9 | 10 and consider IP-B requires MSTOP bits 10 | 11 | 12 (of the same MSTOP register say MSTOP1). Now this will be seperate groups having separate count(ref_cnt). Say you turn ON IP-A module clock and correspondingly clear the MSTOP bits and similarly now lets turn ON module clocks for IP-B and clear the MSTOP bits. Now let's say you want to turn OFF IP-A so you turn OFF module clock and set the MSTOP bits 8 | 9 | 10. In this case you will now see issues with IP-B as MSTOP BIT(10) has been set when we turned OFF IP-A block. This case is handled by switching refcount on per mstop bit by this patch. Cheers, Prabhakar
