Re: [PATCH v2 11/11] media: i2c: ov5645: Report streams using frame descriptors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Prabhakar,

Thanks for the set. It looks largely very nice to me, after addressing
Laurent's comments. A few comments here and possibly on other patches...

On Tue, Sep 10, 2024 at 06:06:10PM +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> 
> Implement the .get_frame_desc() subdev operation to report information
> about streams to the connected CSI-2 receiver. This is required to let
> the CSI-2 receiver driver know about virtual channels and data types for
> each stream.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
>  drivers/media/i2c/ov5645.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> index 7f1133292ffc..c24eb6e7a7b5 100644
> --- a/drivers/media/i2c/ov5645.c
> +++ b/drivers/media/i2c/ov5645.c
> @@ -28,6 +28,7 @@
>  #include <linux/regulator/consumer.h>
>  #include <linux/slab.h>
>  #include <linux/types.h>
> +#include <media/mipi-csi2.h>
>  #include <media/v4l2-ctrls.h>
>  #include <media/v4l2-event.h>
>  #include <media/v4l2-fwnode.h>
> @@ -829,6 +830,32 @@ static const struct v4l2_ctrl_ops ov5645_ctrl_ops = {
>  	.s_ctrl = ov5645_s_ctrl,
>  };
>  
> +static int ov5645_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
> +				 struct v4l2_mbus_frame_desc *fd)
> +{
> +	const struct v4l2_mbus_framefmt *fmt;
> +	struct v4l2_subdev_state *state;
> +
> +	if (pad != OV5645_PAD_SOURCE)
> +		return -EINVAL;

As you have a single source pad, and pretty much all sensor drivers will, I
think it'd be nice to add a check for this (that it's not an internal pad)
to the caller side in v4l2-subdev.c. And of course drop this one.

> +
> +	state = v4l2_subdev_lock_and_get_active_state(sd);
> +	fmt = v4l2_subdev_state_get_format(state, OV5645_PAD_SOURCE, 0);
> +	v4l2_subdev_unlock_state(state);
> +
> +	fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
> +	fd->num_entries = 1;
> +
> +	memset(fd->entry, 0, sizeof(fd->entry));
> +
> +	fd->entry[0].pixelcode = fmt->code;
> +	fd->entry[0].stream = 0;
> +	fd->entry[0].bus.csi2.vc = 0;
> +	fd->entry[0].bus.csi2.dt = MIPI_CSI2_DT_YUV422_8B;
> +
> +	return 0;
> +}
> +
>  static int ov5645_enum_mbus_code(struct v4l2_subdev *sd,
>  				 struct v4l2_subdev_state *sd_state,
>  				 struct v4l2_subdev_mbus_code_enum *code)
> @@ -1062,6 +1089,7 @@ static const struct v4l2_subdev_video_ops ov5645_video_ops = {
>  };
>  
>  static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = {
> +	.get_frame_desc = ov5645_get_frame_desc,
>  	.enum_mbus_code = ov5645_enum_mbus_code,
>  	.enum_frame_size = ov5645_enum_frame_size,
>  	.get_fmt = v4l2_subdev_get_fmt,
> 

-- 
Kind regards,

Sakari Ailus




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux