Re: [PATCH v2 11/11] media: i2c: ov5645: Report streams using frame descriptors

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

Thank you for the review.

On Wed, Sep 25, 2024 at 5:26 PM Laurent Pinchart
<laurent.pinchart@xxxxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Tue, Sep 10, 2024 at 06:06:10PM +0100, Prabhakar wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> >
> > Implement the .get_frame_desc() subdev operation to report information
> > about streams to the connected CSI-2 receiver. This is required to let
> > the CSI-2 receiver driver know about virtual channels and data types for
> > each stream.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> > ---
> >  drivers/media/i2c/ov5645.c | 28 ++++++++++++++++++++++++++++
> >  1 file changed, 28 insertions(+)
> >
> > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c
> > index 7f1133292ffc..c24eb6e7a7b5 100644
> > --- a/drivers/media/i2c/ov5645.c
> > +++ b/drivers/media/i2c/ov5645.c
> > @@ -28,6 +28,7 @@
> >  #include <linux/regulator/consumer.h>
> >  #include <linux/slab.h>
> >  #include <linux/types.h>
> > +#include <media/mipi-csi2.h>
> >  #include <media/v4l2-ctrls.h>
> >  #include <media/v4l2-event.h>
> >  #include <media/v4l2-fwnode.h>
> > @@ -829,6 +830,32 @@ static const struct v4l2_ctrl_ops ov5645_ctrl_ops = {
> >       .s_ctrl = ov5645_s_ctrl,
> >  };
> >
> > +static int ov5645_get_frame_desc(struct v4l2_subdev *sd, unsigned int pad,
> > +                              struct v4l2_mbus_frame_desc *fd)
> > +{
> > +     const struct v4l2_mbus_framefmt *fmt;
> > +     struct v4l2_subdev_state *state;
> > +
> > +     if (pad != OV5645_PAD_SOURCE)
> > +             return -EINVAL;
> > +
> > +     state = v4l2_subdev_lock_and_get_active_state(sd);
> > +     fmt = v4l2_subdev_state_get_format(state, OV5645_PAD_SOURCE, 0);
> > +     v4l2_subdev_unlock_state(state);
>
> Once you unlock the state fmt could change, so you should instead do
>
>         state = v4l2_subdev_lock_and_get_active_state(sd);
>         code = v4l2_subdev_state_get_format(state, OV5645_PAD_SOURCE, 0)->code;
>         v4l2_subdev_unlock_state(state);
>
Ok, I will update the above.

Cheers,
Prabhakar

> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
>
> > +
> > +     fd->type = V4L2_MBUS_FRAME_DESC_TYPE_CSI2;
> > +     fd->num_entries = 1;
> > +
> > +     memset(fd->entry, 0, sizeof(fd->entry));
> > +
> > +     fd->entry[0].pixelcode = fmt->code;
> > +     fd->entry[0].stream = 0;
> > +     fd->entry[0].bus.csi2.vc = 0;
> > +     fd->entry[0].bus.csi2.dt = MIPI_CSI2_DT_YUV422_8B;
> > +
> > +     return 0;
> > +}
> > +
> >  static int ov5645_enum_mbus_code(struct v4l2_subdev *sd,
> >                                struct v4l2_subdev_state *sd_state,
> >                                struct v4l2_subdev_mbus_code_enum *code)
> > @@ -1062,6 +1089,7 @@ static const struct v4l2_subdev_video_ops ov5645_video_ops = {
> >  };
> >
> >  static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = {
> > +     .get_frame_desc = ov5645_get_frame_desc,
> >       .enum_mbus_code = ov5645_enum_mbus_code,
> >       .enum_frame_size = ov5645_enum_frame_size,
> >       .get_fmt = v4l2_subdev_get_fmt,
>
> --
> Regards,
>
> Laurent Pinchart





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux