Currently, all PLLs are modelled as fixed divider clocks, based on the
state of the mode pins. However, the boot loader stack may have changed
the actual PLL configuration from the default, leading to incorrect
clock frequencies.
Describe PLL1 as a fixed fractional PLL instead, and PLL2, PLL3, and
PLL6 as variable fractional PLLs. Note that the R-Car Gen4 clock driver
does not support variable 9.24 PLLs yet, so the driver will downgrade
them to fixed fractional PLLs, too.
Reformat nearby lines to retain a consistent layout.
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
---
v2:
- Add Reviewed-by.
---
drivers/clk/renesas/r8a779f0-cpg-mssr.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/renesas/r8a779f0-cpg-mssr.c b/drivers/clk/renesas/r8a779f0-cpg-mssr.c
index 832ba0bacdf02346..b6b6012f71238627 100644
--- a/drivers/clk/renesas/r8a779f0-cpg-mssr.c
+++ b/drivers/clk/renesas/r8a779f0-cpg-mssr.c
@@ -57,12 +57,12 @@ static const struct cpg_core_clk r8a779f0_core_clks[] __initconst = {
DEF_INPUT("extalr", CLK_EXTALR),
/* Internal Core Clocks */
- DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN4_MAIN, CLK_EXTAL),
- DEF_BASE(".pll1", CLK_PLL1, CLK_TYPE_GEN4_PLL1, CLK_MAIN),
- DEF_BASE(".pll2", CLK_PLL2, CLK_TYPE_GEN4_PLL2, CLK_MAIN),
- DEF_BASE(".pll3", CLK_PLL3, CLK_TYPE_GEN4_PLL3, CLK_MAIN),
- DEF_BASE(".pll5", CLK_PLL5, CLK_TYPE_GEN4_PLL5, CLK_MAIN),
- DEF_BASE(".pll6", CLK_PLL6, CLK_TYPE_GEN4_PLL6, CLK_MAIN),
+ DEF_BASE(".main", CLK_MAIN, CLK_TYPE_GEN4_MAIN, CLK_EXTAL),
+ DEF_GEN4_PLL_F9_24(".pll1", 1, CLK_PLL1, CLK_MAIN),
+ DEF_GEN4_PLL_V9_24(".pll2", 2, CLK_PLL2, CLK_MAIN),
+ DEF_GEN4_PLL_V9_24(".pll3", 3, CLK_PLL3, CLK_MAIN),
+ DEF_BASE(".pll5", CLK_PLL5, CLK_TYPE_GEN4_PLL5, CLK_MAIN),
+ DEF_GEN4_PLL_V9_24(".pll6", 6, CLK_PLL6, CLK_MAIN),
DEF_FIXED(".pll1_div2", CLK_PLL1_DIV2, CLK_PLL1, 2, 1),
DEF_FIXED(".pll2_div2", CLK_PLL2_DIV2, CLK_PLL2, 2, 1),
--
2.34.1
