The RZ/{G2L,G2LC,V2L} SMARC EVK uses Micron MT25QU412A flash and RZ/G2UL
SMARC EVK uses Renesas AT25QL128A flash. With current pin setting for
IOVF pin, 4-bit flash write fails for AT25QL128A flash. Use Hi-Z state
as the default for IOVF pin, so that spi controller driver in linux will
be independent of flash type.
To support this, during board production, the bit 4 of the NV config
register must be cleared by the bootloader for Micron flash.
Output from u-boot after clearing bit4 of NVCR register.
=> renesas_micron_flash_nvcr
SF: Detected mt25qu512a with page size 256 Bytes, erase size 64 KiB, total 64 MiB
NVCR=0xef
Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
---
RFC->v1:
* New patch.
---
drivers/memory/renesas-rpc-if.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/memory/renesas-rpc-if.c b/drivers/memory/renesas-rpc-if.c
index 3167826b236a..7fbd36fa1a1b 100644
--- a/drivers/memory/renesas-rpc-if.c
+++ b/drivers/memory/renesas-rpc-if.c
@@ -367,7 +367,7 @@ int rpcif_hw_init(struct device *dev, bool hyperflash)
regmap_update_bits(rpc->regmap, RPCIF_CMNCR,
RPCIF_CMNCR_MOIIO(3) | RPCIF_CMNCR_IOFV(3) |
RPCIF_CMNCR_BSZ(3),
- RPCIF_CMNCR_MOIIO(1) | RPCIF_CMNCR_IOFV(2) |
+ RPCIF_CMNCR_MOIIO(1) | RPCIF_CMNCR_IOFV(3) |
RPCIF_CMNCR_BSZ(hyperflash ? 1 : 0));
else
regmap_update_bits(rpc->regmap, RPCIF_CMNCR,
--
2.43.0
