From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
The `PIN_CFG_VARIABLE` macro did not indicate the capabilities of a pin
but served as a flag indicating that the pins of a port have different
capabilities.
To better reflect its purpose, move the `PIN_CFG_VARIABLE` macro beside
`RZG2L_SINGLE_PIN` and rename it to `RZG2L_CFG_VARIABLE`. Additionally,
introduce new macros for packing variable port configurations:
- `RZG2L_GPIO_PORT_PACK_VARIABLE(n, a)`: Combines `RZG2L_CFG_VARIABLE`
with `RZG2L_GPIO_PORT_PACK` to handle variable pin configurations
for a packed port.
- `RZG2L_GPIO_PORT_SPARSE_PACK_VARIABLE(m, a)`: Combines
`RZG2L_CFG_VARIABLE` with `RZG2L_GPIO_PORT_SPARSE_PACK` to handle
variable pin configurations for a sparse port.
Due to the above change the configuration macros have been reorganized
as follows:
- Shift the bit positions of `PIN_CFG_NOGPIO_INT`, `PIN_CFG_NOD`,
`PIN_CFG_SMT`, `PIN_CFG_ELC`, and `PIN_CFG_IOLH_RZV2H` down by one
to accommodate the removal of `PIN_CFG_VARIABLE`.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
---
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 29 +++++++++++++++----------
1 file changed, 17 insertions(+), 12 deletions(-)
diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
index 37a99d33400d..9a67de960470 100644
--- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
+++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
@@ -57,14 +57,14 @@
#define PIN_CFG_IOLH_C BIT(13)
#define PIN_CFG_SOFT_PS BIT(14)
#define PIN_CFG_OEN BIT(15)
-#define PIN_CFG_VARIABLE BIT(16)
-#define PIN_CFG_NOGPIO_INT BIT(17)
-#define PIN_CFG_NOD BIT(18) /* N-ch Open Drain */
-#define PIN_CFG_SMT BIT(19) /* Schmitt-trigger input control */
-#define PIN_CFG_ELC BIT(20)
-#define PIN_CFG_IOLH_RZV2H BIT(21)
+#define PIN_CFG_NOGPIO_INT BIT(16)
+#define PIN_CFG_NOD BIT(17) /* N-ch Open Drain */
+#define PIN_CFG_SMT BIT(18) /* Schmitt-trigger input control */
+#define PIN_CFG_ELC BIT(19)
+#define PIN_CFG_IOLH_RZV2H BIT(20)
#define RZG2L_SINGLE_PIN BIT_ULL(63) /* Dedicated pin */
+#define RZG2L_CFG_VARIABLE BIT_ULL(62) /* Variable cfg for port pins */
#define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \
(PIN_CFG_IOLH_##group | \
@@ -100,12 +100,17 @@
#define RZG2L_GPIO_PORT_SPARSE_PACK(m, a, f) (FIELD_PREP_CONST(PIN_CFG_PIN_MAP_MASK, (m)) | \
FIELD_PREP_CONST(PIN_CFG_PIN_REG_MASK, (a)) | \
FIELD_PREP_CONST(PIN_CFG_MASK, (f)))
+#define RZG2L_GPIO_PORT_SPARSE_PACK_VARIABLE(m, a) \
+ (RZG2L_CFG_VARIABLE | \
+ RZG2L_GPIO_PORT_SPARSE_PACK(m, a, 0))
/*
* n indicates number of pins in the port, a is the register index
* and f is pin configuration capabilities supported.
*/
#define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f))
+#define RZG2L_GPIO_PORT_PACK_VARIABLE(n, a) (RZG2L_CFG_VARIABLE | \
+ RZG2L_GPIO_PORT_PACK(n, a, 0))
#define RZG2L_SINGLE_PIN_INDEX_MASK GENMASK_ULL(62, 56)
#define RZG2L_SINGLE_PIN_BITS_MASK GENMASK_ULL(55, 53)
@@ -371,7 +376,7 @@ static u64 rzg2l_pinctrl_get_variable_pin_cfg(struct rzg2l_pinctrl *pctrl,
if (FIELD_GET(VARIABLE_PIN_CFG_PORT_MASK, cfg) == port &&
FIELD_GET(VARIABLE_PIN_CFG_PIN_MASK, cfg) == pin)
- return (pincfg & ~PIN_CFG_VARIABLE) | FIELD_GET(PIN_CFG_MASK, cfg);
+ return (pincfg & ~RZG2L_CFG_VARIABLE) | FIELD_GET(PIN_CFG_MASK, cfg);
}
return 0;
@@ -1835,13 +1840,13 @@ static const u64 r9a07g043_gpio_configs[] = {
RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x06, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
PIN_CFG_FILONOFF | PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P19 */
- RZG2L_GPIO_PORT_PACK(8, 0x07, PIN_CFG_VARIABLE), /* P20 */
+ RZG2L_GPIO_PORT_PACK_VARIABLE(8, 0x07), /* P20 */
RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x08, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P21 */
RZG2L_GPIO_PORT_PACK(4, 0x09, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_PUPD |
PIN_CFG_IEN | PIN_CFG_NOGPIO_INT), /* P22 */
- RZG2L_GPIO_PORT_SPARSE_PACK(0x3e, 0x0a, PIN_CFG_VARIABLE), /* P23 */
- RZG2L_GPIO_PORT_PACK(6, 0x0b, PIN_CFG_VARIABLE), /* P24 */
+ RZG2L_GPIO_PORT_SPARSE_PACK_VARIABLE(0x3e, 0x0a), /* P23 */
+ RZG2L_GPIO_PORT_PACK_VARIABLE(6, 0x0b), /* P24 */
RZG2L_GPIO_PORT_SPARSE_PACK(0x2, 0x0c, PIN_CFG_IOLH_B | PIN_CFG_SR | PIN_CFG_FILONOFF |
PIN_CFG_FILNUM | PIN_CFG_FILCLKSEL |
PIN_CFG_NOGPIO_INT), /* P25 */
@@ -1913,7 +1918,7 @@ static const u64 r9a09g057_gpio_configs[] = {
PIN_CFG_ELC), /* P8 */
RZG2L_GPIO_PORT_PACK(8, 0x29, RZV2H_MPXED_PIN_FUNCS), /* P9 */
RZG2L_GPIO_PORT_PACK(8, 0x2a, RZV2H_MPXED_PIN_FUNCS), /* PA */
- RZG2L_GPIO_PORT_PACK(6, 0x2b, PIN_CFG_VARIABLE), /* PB */
+ RZG2L_GPIO_PORT_PACK_VARIABLE(6, 0x2b), /* PB */
};
static const struct {
@@ -2637,7 +2642,7 @@ static int rzg2l_pinctrl_register(struct rzg2l_pinctrl *pctrl)
if (i && !(i % RZG2L_PINS_PER_PORT))
j++;
pin_data[i] = pctrl->data->port_pin_configs[j];
- if (pin_data[i] & PIN_CFG_VARIABLE)
+ if (pin_data[i] & RZG2L_CFG_VARIABLE)
pin_data[i] = rzg2l_pinctrl_get_variable_pin_cfg(pctrl,
pin_data[i],
j,
--
2.34.1
