From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Define `RZG2L_SINGLE_PIN` at the top of the file to clarify its use for dedicated pins for improved readability. While at it update the comment for `RZG2L_SINGLE_PIN_PACK` macro and place it just above the macro for clarity. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- drivers/pinctrl/renesas/pinctrl-rzg2l.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c index b79dd1ea2616..37a99d33400d 100644 --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c @@ -64,6 +64,8 @@ #define PIN_CFG_ELC BIT(20) #define PIN_CFG_IOLH_RZV2H BIT(21) +#define RZG2L_SINGLE_PIN BIT_ULL(63) /* Dedicated pin */ + #define RZG2L_MPXED_COMMON_PIN_FUNCS(group) \ (PIN_CFG_IOLH_##group | \ PIN_CFG_PUPD | \ @@ -105,15 +107,13 @@ */ #define RZG2L_GPIO_PORT_PACK(n, a, f) RZG2L_GPIO_PORT_SPARSE_PACK((1ULL << (n)) - 1, (a), (f)) -/* - * BIT(63) indicates dedicated pin, p is the register index while - * referencing to SR/IEN/IOLH/FILxx registers, b is the register bits - * (b * 8) and f is the pin configuration capabilities supported. - */ -#define RZG2L_SINGLE_PIN BIT_ULL(63) #define RZG2L_SINGLE_PIN_INDEX_MASK GENMASK_ULL(62, 56) #define RZG2L_SINGLE_PIN_BITS_MASK GENMASK_ULL(55, 53) - +/* + * p is the register index while referencing to SR/IEN/IOLH/FILxx + * registers, b is the register bits (b * 8) and f is the pin + * configuration capabilities supported. + */ #define RZG2L_SINGLE_PIN_PACK(p, b, f) (RZG2L_SINGLE_PIN | \ FIELD_PREP_CONST(RZG2L_SINGLE_PIN_INDEX_MASK, (p)) | \ FIELD_PREP_CONST(RZG2L_SINGLE_PIN_BITS_MASK, (b)) | \ -- 2.34.1
