Hello everyone,
This is version six of my series that addresses the issue with some MAC/PHY
combinations.
Notable changes in v6:
- Corrected trailers
Notable changes in v5:
- Exported phylink_pcs_pre_init() as a GPL symbol
- Corrected kernel doc for phylink_pcs_pre_init()
Notable changes in v4:
- Modified miic_pre_init() to also set the default RMII conversion speed.
Notable changes in v3:
- Removed the "interface" argument from pcs_init().
- Added a kernel doc for pcs_init().
Notable changes in v2:
- Introduced a pcs op for initializing hardware required for MAC
initialization, instead of using phylink_validate() for this purpose.
- Refactored stmmac to use a generic PCS reference in mac_device_info
instead of a model-specific field.
There is an issue with some stmmac/PHY combinations that has been reported
some time ago in a couple of different series:
Clark Wang's report:
https://lore.kernel.org/all/20230202081559.3553637-1-xiaoning.wang@xxxxxxx/
Clément Léger's report:
https://lore.kernel.org/linux-arm-kernel/20230116103926.276869-4-clement.leger@xxxxxxxxxxx/
Stmmac controllers require an RX clock signal from the MII bus to perform
their hardware initialization successfully. This causes issues with some
PHY/PCS devices. If these devices do not bring the clock signal up before
the MAC driver initializes its hardware, then said initialization will
fail. This can happen at probe time or when the system wakes up from a
suspended state.
This series introduces new flags for phy_device and phylink_pcs. These
flags allow MAC drivers to signal to PHY/PCS drivers that the RX clock
signal should be enabled as soon as possible, and that it should always
stay enabled.
I have included specific uses of these flags that fix the RZN1 GMAC1 stmmac
driver that I am currently working on and that is not yet upstream. I have
also included changes to the at803x PHY driver that should fix the issue
that Clark Wang was having.
Clark, could you please confirm that this series fixes your issue with the
at803x PHY?
Best Regards,
Romain
Romain Gantois (2):
net: phy: add rxc_always_on flag to phylink_pcs
net: pcs: rzn1-miic: Init RX clock early if MAC requires it
Russell King (3):
net: phy: add PHY_F_RXC_ALWAYS_ON to PHY dev flags
net: stmmac: Signal to PHY/PCS drivers to keep RX clock on
net: phy: at803x: Avoid hibernating if MAC requires RX clock
.../net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++++
drivers/net/pcs/pcs-rzn1-miic.c | 18 +++++++++++++-----
drivers/net/phy/at803x.c | 3 ++-
drivers/net/phy/phylink.c | 13 ++++++++++++-
include/linux/phy.h | 1 +
include/linux/phylink.h | 9 +++++++++
6 files changed, 42 insertions(+), 7 deletions(-)
--
2.43.0
---
- Link to v2: https://lore.kernel.org/r/20240130-rxc_bugfix-v2-0-5e6c3168e5f0@xxxxxxxxxxx
---
- Link to v3: https://lore.kernel.org/r/20240212-rxc_bugfix-v3-0-e9f2eb6b3b05@xxxxxxxxxxx
---
- Link to v4: https://lore.kernel.org/r/20240221-rxc_bugfix-v4-0-4883ee1cc7b1@xxxxxxxxxxx
---
- Link to v5: https://lore.kernel.org/r/20240301-rxc_bugfix-v5-0-8dac30230050@xxxxxxxxxxx
---
Maxime Chevallier (1):
net: stmmac: don't rely on lynx_pcs presence to check for a PHY
Romain Gantois (4):
net: phylink: add rxc_always_on flag to phylink_pcs
net: stmmac: Support a generic PCS field in mac_device_info
net: stmmac: Signal to PHY/PCS drivers to keep RX clock on
net: pcs: rzn1-miic: Init RX clock early if MAC requires it
Russell King (Oracle) (2):
net: phylink: add PHY_F_RXC_ALWAYS_ON to PHY dev flags
net: phy: qcom: at803x: Avoid hibernating if MAC requires RX clock
drivers/net/ethernet/stmicro/stmmac/common.h | 2 +-
.../net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 8 ++---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 ++++----
drivers/net/pcs/pcs-rzn1-miic.c | 28 +++++++++++++++
drivers/net/phy/phylink.c | 25 ++++++++++++-
drivers/net/phy/qcom/at803x.c | 3 +-
include/linux/phy.h | 1 +
include/linux/phylink.h | 42 ++++++++++++++++++++++
8 files changed, 111 insertions(+), 13 deletions(-)
---
base-commit: d7e14e534493328cc5f67baaff2b0c23d32b0a57
change-id: 20240126-rxc_bugfix-d47b3b1a374f
Best regards,
--
Romain Gantois <romain.gantois@xxxxxxxxxxx>
