From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> The initialization sequence for PTP is the same for platforms with ccc_gac and gptp (according to "Figure 50.71 Flow of gPTP Initialization (Normal, Common to All Modes)" of the R-Car Series, 3rd generation hardware manual and "Figure 37A.53 Flow of gPTP Initialization (Normal, Common to All Modes)" of the RZ/G Series hardware manual). As some IP variants switch to reset mode (and thus the registers content is lost) when setting clocks (due to module standby functionality) to be able to implement runtime PM, move the PTP initialization to the driver's ndo_open API. This commit prepares the code for the addition of runtime PM. Reviewed-by: Sergey Shtylyov <s.shtylyov@xxxxxx> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> --- Changes in v5: - none Changes in v4: - none Changes in v3: - fixed typos in patch description - collected tags Changes in v2: - none; this patch is new drivers/net/ethernet/renesas/ravb_main.c | 18 +++--------------- 1 file changed, 3 insertions(+), 15 deletions(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 318ab27635bb..54099fef946e 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1876,7 +1876,7 @@ static int ravb_open(struct net_device *ndev) ravb_set_gti(ndev); /* Initialise PTP Clock driver */ - if (info->gptp) + if (info->gptp || info->ccc_gac) ravb_ptp_init(ndev, priv->pdev); /* PHY control start */ @@ -1890,7 +1890,7 @@ static int ravb_open(struct net_device *ndev) out_ptp_stop: /* Stop PTP Clock driver */ - if (info->gptp) + if (info->gptp || info->ccc_gac) ravb_ptp_stop(ndev); ravb_stop_dma(ndev); out_napi_off: @@ -2200,7 +2200,7 @@ static int ravb_close(struct net_device *ndev) ravb_write(ndev, 0, TIC); /* Stop PTP Clock driver */ - if (info->gptp) + if (info->gptp || info->ccc_gac) ravb_ptp_stop(ndev); /* Set the config mode to stop the AVB-DMAC's processes */ @@ -2813,10 +2813,6 @@ static int ravb_probe(struct platform_device *pdev) /* Initialise HW timestamp list */ INIT_LIST_HEAD(&priv->ts_skb_list); - /* Initialise PTP Clock driver */ - if (info->ccc_gac) - ravb_ptp_init(ndev, pdev); - /* Debug message level */ priv->msg_enable = RAVB_DEF_MSG_ENABLE; @@ -2861,10 +2857,6 @@ static int ravb_probe(struct platform_device *pdev) out_dma_free: dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat, priv->desc_bat_dma); - - /* Stop PTP Clock driver */ - if (info->ccc_gac) - ravb_ptp_stop(ndev); out_rpm_put: pm_runtime_put(&pdev->dev); out_rpm_disable: @@ -2890,10 +2882,6 @@ static void ravb_remove(struct platform_device *pdev) ravb_mdio_release(priv); - /* Stop PTP Clock driver */ - if (info->ccc_gac) - ravb_ptp_stop(ndev); - dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat, priv->desc_bat_dma); -- 2.39.2
