From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> DBAT setup was done in the driver's probe API. As some IP variants switch to reset mode (and thus registers content is lost) when setting clocks (due to module standby functionality) to be able to implement runtime PM move the DBAT configuration in the driver's ndo_open API. This commit prepares the code for the addition of runtime PM. Reviewed-by: Sergey Shtylyov <s.shtylyov@xxxxxx> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx> --- Changes in v5: - none Changes in v4: - none Changes in v3: - collected tags Changes in v2: - none; this patch is new drivers/net/ethernet/renesas/ravb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index e5805e0d8e13..318ab27635bb 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1865,6 +1865,7 @@ static int ravb_open(struct net_device *ndev) napi_enable(&priv->napi[RAVB_NC]); ravb_set_delay_mode(ndev); + ravb_write(ndev, priv->desc_bat_dma, DBAT); /* Device init */ error = ravb_dmac_init(ndev); @@ -2808,7 +2809,6 @@ static int ravb_probe(struct platform_device *pdev) } for (q = RAVB_BE; q < DBAT_ENTRY_NUM; q++) priv->desc_bat[q].die_dt = DT_EOS; - ravb_write(ndev, priv->desc_bat_dma, DBAT); /* Initialise HW timestamp list */ INIT_LIST_HEAD(&priv->ts_skb_list); -- 2.39.2
