[PATCH net-next v2 2/7] net: phy: add rxc_always_on flag to phylink_pcs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Some MAC drivers (e.g. stmmac) require a continuous receive clock signal to
be generated by a PCS that is handled by a standalone PCS driver.

Such a PCS driver does not have access to a PHY device, thus cannot check
the PHY_F_RXC_ALWAYS_ON flag. They cannot check max_requires_rxc in the
phylink config either, since it is a private member. Therefore, a new flag
is needed to signal to the PCS that it should keep the RX clock signal up
at all times.

Suggested-by: Russell King <linux@xxxxxxxxxxxxxxx>
Signed-off-by: Romain Gantois <romain.gantois@xxxxxxxxxxx>
---
 drivers/net/phy/phylink.c | 14 ++++++++++++++
 include/linux/phylink.h   | 11 +++++++++++
 2 files changed, 25 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 851049096488..6fcc0a8ba122 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -1042,6 +1042,20 @@ static void phylink_pcs_poll_start(struct phylink *pl)
 		mod_timer(&pl->link_poll, jiffies + HZ);
 }
 
+int phylink_pcs_pre_init(struct phylink *pl, struct phylink_pcs *pcs)
+{
+	int ret = 0;
+
+	/* Signal to PCS driver that MAC requires RX clock for init */
+	if (pl->config->mac_requires_rxc)
+		pcs->rxc_always_on = true;
+
+	if (pcs->ops->pcs_pre_init)
+		ret = pcs->ops->pcs_pre_init(pcs, pl->link_config.interface);
+
+	return ret;
+}
+
 static void phylink_mac_config(struct phylink *pl,
 			       const struct phylink_link_state *state)
 {
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index fcee99632964..71e970271fd3 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -396,6 +396,10 @@ struct phylink_pcs_ops;
  * @phylink: pointer to &struct phylink_config
  * @neg_mode: provide PCS neg mode via "mode" argument
  * @poll: poll the PCS for link changes
+ * @rxc_always_on: The MAC driver requires the reference clock
+ *                 to always be on. Standalone PCS drivers which
+ *                 do not have access to a PHY device can check
+ *                 this instead of PHY_F_RXC_ALWAYS_ON.
  *
  * This structure is designed to be embedded within the PCS private data,
  * and will be passed between phylink and the PCS.
@@ -408,6 +412,7 @@ struct phylink_pcs {
 	struct phylink *phylink;
 	bool neg_mode;
 	bool poll;
+	bool rxc_always_on;
 };
 
 /**
@@ -422,6 +427,8 @@ struct phylink_pcs {
  * @pcs_an_restart: restart 802.3z BaseX autonegotiation.
  * @pcs_link_up: program the PCS for the resolved link configuration
  *               (where necessary).
+ * @pcs_pre_init: configure PCS components necessary for MAC hardware
+ *                initialization e.g. RX clock for stmmac.
  */
 struct phylink_pcs_ops {
 	int (*pcs_validate)(struct phylink_pcs *pcs, unsigned long *supported,
@@ -441,6 +448,8 @@ struct phylink_pcs_ops {
 	void (*pcs_an_restart)(struct phylink_pcs *pcs);
 	void (*pcs_link_up)(struct phylink_pcs *pcs, unsigned int neg_mode,
 			    phy_interface_t interface, int speed, int duplex);
+	int (*pcs_pre_init)(struct phylink_pcs *pcs,
+			    phy_interface_t interface);
 };
 
 #if 0 /* For kernel-doc purposes only. */
@@ -568,6 +577,8 @@ void phylink_disconnect_phy(struct phylink *);
 void phylink_mac_change(struct phylink *, bool up);
 void phylink_pcs_change(struct phylink_pcs *, bool up);
 
+int phylink_pcs_pre_init(struct phylink *pl, struct phylink_pcs *pcs);
+
 void phylink_start(struct phylink *);
 void phylink_stop(struct phylink *);
 

-- 
2.43.0





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux