Re: [PATCH net-next v2 10/21] net: ravb: Move delay mode set in the driver's ndo_open API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/14/23 2:45 PM, Claudiu wrote:

> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> 
> Delay parse and set were done in the driver's probe API. As some IP

   Parsing and setting?

> variants switch to reset mode (and thus registers' content is lost) when

   Register.

> setting clocks (due to module standby functionality) to be able to
> implement runtime PM keep the delay parsing in the driver's probe function
> and move the delay apply function to the driver's ndo_open API.

   Applying?

> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
[...]

> diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
> index 5e01e03e1b43..04eaa1967651 100644
> --- a/drivers/net/ethernet/renesas/ravb_main.c
> +++ b/drivers/net/ethernet/renesas/ravb_main.c
[...]
> @@ -1806,6 +1821,8 @@ static int ravb_open(struct net_device *ndev)
>  	if (info->nc_queues)
>  		napi_enable(&priv->napi[RAVB_NC]);
>  
> +	ravb_set_delay_mode(ndev);
> +

   I suspect this belongs in ravb_dmac_init() now...

>  	/* Device init */
>  	error = ravb_dmac_init(ndev);
>  	if (error)
[...]

MRB, Sergey




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux