[PATCH net-next v2 10/21] net: ravb: Move delay mode set in the driver's ndo_open API

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

Delay parse and set were done in the driver's probe API. As some IP
variants switch to reset mode (and thus registers' content is lost) when
setting clocks (due to module standby functionality) to be able to
implement runtime PM keep the delay parsing in the driver's probe function
and move the delay apply function to the driver's ndo_open API.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
---

Changes in v2:
- none; this patch is new

 drivers/net/ethernet/renesas/ravb_main.c | 37 ++++++++++++++----------
 1 file changed, 21 insertions(+), 16 deletions(-)

diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 5e01e03e1b43..04eaa1967651 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1795,6 +1795,21 @@ static int ravb_compute_gti(struct net_device *ndev)
 	return 0;
 }
 
+static void ravb_set_delay_mode(struct net_device *ndev)
+{
+	struct ravb_private *priv = netdev_priv(ndev);
+	u32 set = 0;
+
+	if (!priv->info->internal_delay)
+		return;
+
+	if (priv->rxcidm)
+		set |= APSR_RDM;
+	if (priv->txcidm)
+		set |= APSR_TDM;
+	ravb_modify(ndev, APSR, APSR_RDM | APSR_TDM, set);
+}
+
 /* Network device open function for Ethernet AVB */
 static int ravb_open(struct net_device *ndev)
 {
@@ -1806,6 +1821,8 @@ static int ravb_open(struct net_device *ndev)
 	if (info->nc_queues)
 		napi_enable(&priv->napi[RAVB_NC]);
 
+	ravb_set_delay_mode(ndev);
+
 	/* Device init */
 	error = ravb_dmac_init(ndev);
 	if (error)
@@ -2530,6 +2547,9 @@ static void ravb_parse_delay_mode(struct device_node *np, struct net_device *nde
 	bool explicit_delay = false;
 	u32 delay;
 
+	if (!priv->info->internal_delay)
+		return;
+
 	if (!of_property_read_u32(np, "rx-internal-delay-ps", &delay)) {
 		/* Valid values are 0 and 1800, according to DT bindings */
 		priv->rxcidm = !!delay;
@@ -2679,18 +2699,6 @@ static int ravb_request_irqs(struct ravb_private *priv)
 			     ndev, dev, "mgmt_a");
 }
 
-static void ravb_set_delay_mode(struct net_device *ndev)
-{
-	struct ravb_private *priv = netdev_priv(ndev);
-	u32 set = 0;
-
-	if (priv->rxcidm)
-		set |= APSR_RDM;
-	if (priv->txcidm)
-		set |= APSR_TDM;
-	ravb_modify(ndev, APSR, APSR_RDM | APSR_TDM, set);
-}
-
 static int ravb_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -2818,10 +2826,7 @@ static int ravb_probe(struct platform_device *pdev)
 	if (error)
 		goto out_rpm_put;
 
-	if (info->internal_delay) {
-		ravb_parse_delay_mode(np, ndev);
-		ravb_set_delay_mode(ndev);
-	}
+	ravb_parse_delay_mode(np, ndev);
 
 	/* Allocate descriptor base address table */
 	priv->desc_bat_size = sizeof(struct ravb_desc) * DBAT_ENTRY_NUM;
-- 
2.39.2





[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux