Re: [PATCH 04/14] clk: renesas: r9a08g045-cpg: Add clock and reset support for ETH0 and ETH1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Geert,

On 01.12.2023 17:59, Geert Uytterhoeven wrote:
> Hi Claudiu,
> 
> On Mon, Nov 20, 2023 at 8:01 AM Claudiu <claudiu.beznea@xxxxxxxxx> wrote:
>> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
>>
>> RZ/G3S has 2 Gigabit Ethernet interfaces available. Add clock and reset
>> support for both of them.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> 
> Thanks for your patch!
> 
>> --- a/drivers/clk/renesas/r9a08g045-cpg.c
>> +++ b/drivers/clk/renesas/r9a08g045-cpg.c
>> @@ -217,6 +219,16 @@ static const struct rzg2l_mod_clk r9a08g045_mod_clks[] = {
>>                                         MSTOP(PERI_COM, BIT(11))),
>>         DEF_MOD("sdhi2_aclk",           R9A08G045_SDHI2_ACLK, R9A08G045_CLK_P1, 0x554, 11,
>>                                         MSTOP(PERI_COM, BIT(11))),
>> +       DEF_COUPLED("eth0_axi",         R9A08G045_ETH0_CLK_AXI, R9A08G045_CLK_M0, 0x57c, 0,
>> +                                       MSTOP(PERI_COM, BIT(2))),
>> +       DEF_COUPLED("eth0_chi",         R9A08G045_ETH0_CLK_CHI, R9A08G045_CLK_ZT, 0x57c, 0,
>> +                                       MSTOP(PERI_COM, BIT(2))),
>> +       DEF_MOD("eth0_refclk",          R9A08G045_ETH0_REFCLK, R9A08G045_CLK_HP, 0x57c, 8, 0),
>> +       DEF_COUPLED("eth1_axi",         R9A08G045_ETH1_CLK_AXI, R9A08G045_CLK_M0, 0x57c, 1,
>> +                                       MSTOP(PERI_COM, BIT(3))),
>> +       DEF_COUPLED("eth1_chi",         R9A08G045_ETH1_CLK_CHI, R9A08G045_CLK_ZT, 0x57c, 1,
>> +                                       MSTOP(PERI_COM, BIT(3))),
>> +       DEF_MOD("eth1_refclk",          R9A08G045_ETH1_REFCLK, R9A08G045_CLK_HP, 0x57c, 9, 0),
>>         DEF_MOD("scif0_clk_pck",        R9A08G045_SCIF0_CLK_PCK, R9A08G045_CLK_P0, 0x584, 0,
>>                                         MSTOP(MCPU2, BIT(1))),
>>         DEF_MOD("gpio_hclk",            R9A08G045_GPIO_HCLK, R9A08G045_OSCCLK, 0x598, 0, 0),
> 
> LGTM, pending the MSTOP() part.
> 
> Is the MSTOP() handling needed to function? IIUIC, all modules are
> enabled
> out of reset.

MSTOP is not needed for Ethernet to work. Indeed, all modules are enabled
out of reset.

> If it is not needed, I can take this patch and remove the MSTOP() part.

It's OK for me. Thank you for handling this.

Anyway, let me know if you encounter issues with it so I can resend it.

Thank you,
Claudiu Beznea

> 
> Gr{oetje,eeting}s,
> 
>                         Geert
> 




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux