From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Hi,
Series adds Ethernet support for Renesas RZ/G3S Ethernet.
Along with it preparatory cleanups and fixes were included.
Patches 1-4 are clock specific.
Patches 5-8 are pinctrl specific.
Patches 9-13 are device tree specific.
Patch 14 updates multi_v7_defconfig with RAVB flag.
Thank you,
Claudiu Beznea
Claudiu Beznea (14):
clk: renesas: rzg2l-cpg: Reuse code in rzg2l_cpg_reset()
clk: renesas: rzg2l-cpg: Check reset monitor registers
clk: renesas: rzg2l-cpg: Add support for MSTOP
clk: renesas: r9a08g045-cpg: Add clock and reset support for ETH0 and
ETH1
pinctrl: renesas: rzg2l: Move arg in the main function block
pinctrl: renesas: rzg2l: Add pin configuration support for pinmux
groups
pinctrl: renesas: rzg2l: Add support to select power source for
Ethernet pins
pinctrl: renesas: rzg2l: add output enable support
dt-bindings: net: renesas,etheravb: Document RZ/G3S support
arm64: renesas: r9a08g045: Add Ethernet nodes
arm64: renesas: rzg3s-smarc-som: Invert the logic for SW_SD2_EN macro
arm64: dts: renesas: Improve documentation for SW_SD0_DEV_SEL
arm64: dts: renesas: rzg3s-smarc-som: Enable Ethernet interfaces
arm: multi_v7_defconfig: Enable CONFIG_RAVB
.../bindings/net/renesas,etheravb.yaml | 1 +
arch/arm/configs/multi_v7_defconfig | 1 +
arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 32 ++++
.../boot/dts/renesas/rzg3s-smarc-som.dtsi | 153 +++++++++++++++-
drivers/clk/renesas/r9a07g043-cpg.c | 116 ++++++------
drivers/clk/renesas/r9a07g044-cpg.c | 158 ++++++++---------
drivers/clk/renesas/r9a08g045-cpg.c | 64 +++++--
drivers/clk/renesas/r9a09g011-cpg.c | 116 ++++++------
drivers/clk/renesas/rzg2l-cpg.c | 166 +++++++++++++++---
drivers/clk/renesas/rzg2l-cpg.h | 21 ++-
drivers/pinctrl/renesas/pinctrl-rzg2l.c | 166 ++++++++++++++++--
11 files changed, 736 insertions(+), 258 deletions(-)
--
2.39.2
