RE: [PATCH 3/6] rtc: da9063: Use dev_err_probe()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alexandre Belloni,

Thanks for the feedback.

> -----Original Message-----
> Subject: Re: [PATCH 3/6] rtc: da9063: Use dev_err_probe()
> 
> On 01/12/2023 13:30:05+0000, Biju Das wrote:
> > Hi Geert,
> >
> > Thanks for the feedback.
> >
> > > -----Original Message-----
> > > From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> > > Subject: Re: [PATCH 3/6] rtc: da9063: Use dev_err_probe()
> > >
> > > Hi Biju,
> > >
> > > On Fri, Dec 1, 2023 at 12:08 PM Biju Das
> > > <biju.das.jz@xxxxxxxxxxxxxx>
> > > wrote:
> > > > Replace dev_err()->dev_err_probe() to simpilfy probe().
> > > >
> > > > Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> > >
> > > Thanks for your patch!
> > >
> > > > --- a/drivers/rtc/rtc-da9063.c
> > > > +++ b/drivers/rtc/rtc-da9063.c
> > > > @@ -488,8 +480,9 @@ static int da9063_rtc_probe(struct
> > > > platform_device
> > > *pdev)
> > > >                                                 IRQF_TRIGGER_LOW |
> > > IRQF_ONESHOT,
> > > >                                                 "ALARM", rtc);
> > > >                 if (ret)
> > > > -                       dev_err(&pdev->dev, "Failed to request ALARM
> > > IRQ %d: %d\n",
> > > > -                               irq_alarm, ret);
> > > > +                       return dev_err_probe(&pdev->dev, ret,
> > > > +                                            "Failed to request
> > > > + ALARM
> > > IRQ %d\n",
> > > > +                                            irq_alarm);
> > >
> > > This changes behavior: before, this was not considered fatal.
> >
> > Agreed. Maybe a separate patch?
> >
> > if there is no irqhandler on platform with IRQ populated nothing will
> > work, RTC won't work as "rtc_update_irq " updated in irq handler.
> > I think it is a fatal condition.
> 
> This is not true, an RTC can wake up a system without an IRQ.

Agreed, I will restore the behaviour for this case.
It may not be fatal. But basic "hwclock -r" from userspace won't
work as " RTC_FEATURE_UPDATE_INTERRUPT" set and there is no irqhandler.

Cheers,
Biju



Cheers,
Biju

> 
> >
> > Cheers,
> > Biju
> >
> > >
> > > >
> > > >                 ret = dev_pm_set_wake_irq(&pdev->dev, irq_alarm);
> > > >                 if (ret)
> > >
> > > The rest LGTM, so with the above fixed/clarified:
> > > Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > >
> > > Gr{oetje,eeting}s,
> > >
> > >                         Geert
> > >
> > > --
> > > Geert Uytterhoeven -- There's lots of Linux beyond ia32 --
> > > geert@linux- m68k.org
> > >
> > > In personal conversations with technical people, I call myself a
> hacker.
> > > But when I'm talking to journalists I just say "programmer" or
> > > something like that.
> > >                                 -- Linus Torvalds
> 
> --
> Alexandre Belloni, co-owner and COO, Bootlin Embedded Linux and Kernel
> engineering
> https://jpn01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fbootlin.
> com%2F&data=05%7C01%7Cbiju.das.jz%40bp.renesas.com%7Cb699f48656d34a923a640
> 8dbf28104af%7C53d82571da1947e49cb4625a166a4a2a%7C0%7C0%7C63837040817604431
> 5%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1h
> aWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=E9tDi08sBRoh4tBccQB%2B8az%2BqQ4%2
> FtQOpFjdPgU8zQXc%3D&reserved=0




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux