The bus properties for HDMI capture are defined on the incorrect node
for the VIN driver to be able to consume them. They are described on the
HDMI video source but they should be described on the VIN capture node,
move them.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/draak.dtsi | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi
index 08b3458a5025..953d1bb98f9d 100644
--- a/arch/arm64/boot/dts/renesas/draak.dtsi
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -424,9 +424,6 @@ port@2 {
* VIN4 here.
*/
adv7612_out: endpoint {
- pclk-sample = <0>;
- hsync-active = <0>;
- vsync-active = <0>;
remote-endpoint = <&vin4_in>;
};
};
@@ -735,6 +732,9 @@ &vin4 {
ports {
port {
vin4_in: endpoint {
+ pclk-sample = <0>;
+ hsync-active = <0>;
+ vsync-active = <0>;
remote-endpoint = <&adv7612_out>;
};
};
--
2.42.0
