Most Gen3 R-Car devices have HDMI as the default video input source,
align Draak with them and make HDMI the default.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
---
* Changes since v1
- Split moving the incorrect bus properties to separate patch.
---
arch/arm64/boot/dts/renesas/draak.dtsi | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/draak.dtsi b/arch/arm64/boot/dts/renesas/draak.dtsi
index ef3bb835d5c0..08b3458a5025 100644
--- a/arch/arm64/boot/dts/renesas/draak.dtsi
+++ b/arch/arm64/boot/dts/renesas/draak.dtsi
@@ -356,12 +356,9 @@ port@3 {
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
- * CVBS is the default selection, link it to
- * VIN4 here.
+ * HDMI is the default selection, leave CVBS
+ * not connected here.
*/
- adv7180_out: endpoint {
- remote-endpoint = <&vin4_in>;
- };
};
};
@@ -423,13 +420,14 @@ port@2 {
* CVBS and HDMI inputs through SW[49-53]
* switches.
*
- * CVBS is the default selection, leave HDMI
- * not connected here.
+ * HDMI is the default selection, link it to
+ * VIN4 here.
*/
adv7612_out: endpoint {
pclk-sample = <0>;
hsync-active = <0>;
vsync-active = <0>;
+ remote-endpoint = <&vin4_in>;
};
};
};
@@ -580,8 +578,8 @@ usb0_pins: usb0 {
function = "usb0";
};
- vin4_pins_cvbs: vin4 {
- groups = "vin4_data8", "vin4_sync", "vin4_clk";
+ vin4_pins: vin4 {
+ groups = "vin4_data24", "vin4_sync", "vin4_clk";
function = "vin4";
};
};
@@ -729,7 +727,7 @@ &usb2_phy0 {
};
&vin4 {
- pinctrl-0 = <&vin4_pins_cvbs>;
+ pinctrl-0 = <&vin4_pins>;
pinctrl-names = "default";
status = "okay";
@@ -737,7 +735,7 @@ &vin4 {
ports {
port {
vin4_in: endpoint {
- remote-endpoint = <&adv7180_out>;
+ remote-endpoint = <&adv7612_out>;
};
};
};
--
2.42.0
