From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> Now that noncoherent dma support is added for RZ/Five SoC enable the IP blocks which were disabled on RZ/Five SMARC. Now with this patch we get support for the below peripherals: * DMAC * SDHI * USB * RSPI * SSI Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> --- .../boot/dts/renesas/rzfive-smarc-som.dtsi | 23 -------- arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi | 56 ------------------- 2 files changed, 79 deletions(-) diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi index c62debc7ca7e..433ab5c6a626 100644 --- a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi @@ -7,25 +7,8 @@ #include <arm64/renesas/rzg2ul-smarc-som.dtsi> -/ { - aliases { - /delete-property/ ethernet0; - /delete-property/ ethernet1; - }; - - chosen { - bootargs = "ignore_loglevel"; - }; -}; - -&dmac { - status = "disabled"; -}; - #if (!SW_ET0_EN_N) ð0 { - status = "disabled"; - phy0: ethernet-phy@7 { /delete-property/ interrupt-parent; /delete-property/ interrupts; @@ -34,14 +17,8 @@ phy0: ethernet-phy@7 { #endif ð1 { - status = "disabled"; - phy1: ethernet-phy@7 { /delete-property/ interrupt-parent; /delete-property/ interrupts; }; }; - -&sdhi0 { - status = "disabled"; -}; diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi index c07a487c4e5a..a8573fdfd8b1 100644 --- a/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi +++ b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi @@ -6,59 +6,3 @@ */ #include <arm64/renesas/rzg2ul-smarc.dtsi> - -&ehci0 { - status = "disabled"; -}; - -&ehci1 { - status = "disabled"; -}; - -&hsusb { - status = "disabled"; -}; - -&ohci0 { - status = "disabled"; -}; - -&ohci1 { - status = "disabled"; -}; - -&phyrst { - status = "disabled"; -}; - -&sdhi1 { - status = "disabled"; -}; - -&snd_rzg2l { - status = "disabled"; -}; - -&spi1 { - status = "disabled"; -}; - -&ssi1 { - status = "disabled"; -}; - -&usb0_vbus_otg { - status = "disabled"; -}; - -&usb2_phy0 { - status = "disabled"; -}; - -&usb2_phy1 { - status = "disabled"; -}; - -&vccq_sdhi1 { - status = "disabled"; -}; -- 2.34.1