From: Tam Nguyen <tam.nguyen.xa@xxxxxxxxxxx>
Fix the MPIC.PSMCS value following the programming example in the
section 6.4.2 Management Data Clock (MDC) Setting, Ethernet MAC IP,
S4 Hardware User Manual Rev.1.00.
The value is calculated by
MPIC.PSMCS = clk[MHz] / ((MDC frequency[MHz] + 1) * 2)
with the input clock frequency of 320MHz and MDC frequency of 2.5MHz.
Otherwise, this driver cannot communicate PHYs on the R-Car S4 Starter
Kit board.
Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"")
Signed-off-by: Tam Nguyen <tam.nguyen.xa@xxxxxxxxxxx>
Signed-off-by: Hai Pham <hai.pham.ud@xxxxxxxxxxx>
[shimoda: Revise subject/commit description and add Fixes tag]
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
---
drivers/net/ethernet/renesas/rswitch.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/renesas/rswitch.c b/drivers/net/ethernet/renesas/rswitch.c
index ea9186178091..8b5e2380f114 100644
--- a/drivers/net/ethernet/renesas/rswitch.c
+++ b/drivers/net/ethernet/renesas/rswitch.c
@@ -1049,7 +1049,7 @@ static void rswitch_rmac_setting(struct rswitch_etha *etha, const u8 *mac)
static void rswitch_etha_enable_mii(struct rswitch_etha *etha)
{
rswitch_modify(etha->addr, MPIC, MPIC_PSMCS_MASK | MPIC_PSMHT_MASK,
- MPIC_PSMCS(0x05) | MPIC_PSMHT(0x06));
+ MPIC_PSMCS(0x3f) | MPIC_PSMHT(0x06));
rswitch_modify(etha->addr, MPSM, 0, MPSM_MFF_C45);
}
--
2.25.1
